Silicone Condensation 20
The Silicone Condensation 20 is a 2-component (poly-condensation) molding silicone which cures at room temperature.
Silicone dye can be used to color your silicone
Silicone Condensation 20 Starter kit
Silicone Condensation Starter kit 20 is based on our 2-component (poly-condensation) casting silicone suited for soap, candle and concrete moulds etc.
Release agent (spray)
This release spray works well for releasing your silicone mold from the original or for releasing castings from your silicone mold.
Silicone Oil 50 cSt
With silicone oil 50 cSt, you can easily change the hardness / Shore (stiffness), fluidity and elasticity of silicone.
Condensation silicone DC 3481 R
The Silicone condenation DC 3481 with catalyst 3081 R is idealy suited to make molds for aggressive resins like Epoxy, Polyester and Polyurethane.
Condensation silicone DC 3481 Fast
The Silicone condenation DC 3481 with catalyst 3081 F is idealy suited to make molds for concrete, wax or soaps in a relatively short time.
Silicone condensation HT 60 (Hard)
Silicone condensation HT 60 are highly filled and may be used to make molds for the casting of high temperature compounds such as tin and lead.
- Ordered before 15:00 (Fridays 13.00), shipped the same day
- Always the best price guarantee...
- Not good? Money back guarantee
- Independent customer reviews on trusted shops
- Free shipping in the Netherlands on all orders of € 50 or more
- Customer Service Tel. 0031 46 410 62 60 or in our shop
Silicone condensation Thixo C
Silicone Thixo C is a thickening agent for all condensation curing silicone.
Polyvinyl Alcohol Release agent (PVA)
This poly vinyl alochol solution will build a layer that will protect addition curing silicones from inhibition by the surface of the model.
The Silicone Primer increases the adhesion between a surface and the addition silicone that is poured onto it.
Silicone Condensation Kneadable (Above Average Hard)
This kneadable condensation curing silicone is an ideal way to copy small and relatively flat shapes quickly and easily.
Silicone Glue Set
This Silicone Glue Set is ideal for bonding cured silicone to a wide variety of substrates.
Latex gloves, one size fits all. protects your hands from irritants and keeps them clean.
Release agent (wax)
This release agent is a wax to facilitte the de-moulding of the silicone mold from the original and to release casts from the silicone mold.
Vinyl gloves, one size fits all. protects your hands from irritants and keeps them clean.
Silicone Oil 350 cSt
With silicone oil 350 cSt, you can easily change the hardness / Shore (stiffness), fluidity and elasticity of silicone.
The Silicone Remover is very suitable for dissolving and cleaning of uncured silicone.