Back

Polyurethane casting system D70 Quick Set

  • Polyurethane casting system D70 Quick Set
  • Polyurethane casting system D70 Quick Set
  • Polyurethane casting system D70 Quick Set
  • Polyurethane casting system D70 Quick Set

1-2 days

    € 14,95

    Add to wishlist

    • Besteld voor 16 uur? Vandaag nog verzonden! TooltipOp vrijdag voor 15.00 uur
    • Kopen bij specialist
    • Verzending €3.95, gratis vanaf €50 (NL)
    • Not good? Money Back!
    Placeholder4.7

    Ratings

    Product description

    Polyurethane casting system D70 Quick Set

    Polyurethane casting system D70 Quick Set is a polyurethane casting system consisting of an A component and B component that hardens at room temperature to a rigid plsatic. The system works well for very small up to moderately small castings, protot...

    Read the full product description

    Polyurethane casting system D80 Fast

    ++BLUE++This PU results in a hard plastic that is very suitable for small castings, fixing molds, foundry models, replicas and prototypes. ++ENDBLUE++

    Description
    A polyurethane casting system consisting of an A component and B component. Optional fillers can be added. This casting system is characterized in particular by its quality and ease of use. The system can be used perfectly for small castings, fixing molds, foundry models, replicas and prototypes.

    Technical data

     

     

    Unit

     

    Unfilled

    stuffed

    Mixing ratio (weight)

     

    [Isocyanate: Polyol: Filler]

     

    1: 1: 0

    1: 1: 3

    processing Time

     

    [Min]

     

    2

    4

    De-mould time@ 20ºC

     

    [min

     

    15

    30-40

    Density

     

    [g / cm³]

     

    1:08

    1.6

    linear shrinkage

     

    [%]

     

    0.2

    0.15

    Maximum thickness per cast

     

    [mm]

     

    4-30

    30-40

    Glass transition temperature

     

    [oC]

     

    60-70

    60-70

    Hardness

     

    [Shore D]

     

    70

    80

    Processing
    Pour the components together and mix well. Pour the mixed product with a constant flow into the mold, making sure no air is entrapped. Excessive heat in castings of more than 30 mm thickness can be prevented by pouring multiple successive layers (let the layer harden till it is over its exothermal peak before the next layer is poured). Hold the de-moulding until the specified time has elapsed. The thermal and mechanical properties will develop rapidly, but it is possible to improve the thermal behavior by "post curing" the cast for a few hours at a temperature of 60 0C.

    Important
    The dehumidifiers in these products tend to settle out. We therefore recommend aggitating the components before decanting. The less filler you add, the higher the exothermic peak will be. Adding a heat conducting filler will make casting thicker layers possible. Use a mixing vessel with large surface area in order to make a maximum pot life. Adding to much filler might make the product more rigid and brittle.

    Packing
    The polyurethane casting system is supplied in a kit consisting of: 0.25 kg A component + 0.25 kg B component or 0.5kg A + 0,5 kg B, or 4,5 Kg A + 4.5 Kg B canisters.

    Durability
    The polyurethane casting system should be stored in a dry place between 6-28 ° C, the expiration date, which is based on storage within the specified conditions, is indicated on the packaging. Opened packages should be processed as quickly as possible to ensure product quality. Max shelf life is 6 months

    safety
    The products are generally quite safe in use as long as one takes the usual precautions which is common in processing of chemical products. For example, the two components must not come into contact with food or eating utensils. Contact with the skin of one or both components must be avoided. If after cleaning skin stays sensitive contact a docter. Rinse eyes well for 15 minutes in case material gets in the eyes and contact docter. Do not ingest. For further information see Safety Data Sheet.

    ++DOWNLOADS++

    DocumentDownload
    Product Information

    Tutorial Filled PU

    ++USP++

    • White colored two or three-piece system
    • Designed for fast, accurate castings
    • Can be molded into a layer thickness of 40 mm, provided that you are using sufficient filler
    • Filler quantity varies depending on application, and even entirely omittable
    • After 40 minutes, ontmalbaar (in mixture 1: 1: 3)
    • Can be used with up to 600% (of the total weight) are mixed with filler

    Specifications

    Specifications for: Polyurethane casting system D70 Quick Set

    • Color A Comp. Grey / White
    • Color B Comp. Blue
    • end Color White
    • cured density 1,08 g/cm3 / 1,60 g/cm3
    • viscosity mixture 1300 cPS
    • View all specifications
    • Mixing ratio A: B 25:100
    • Shore (D) 70-80
    • Working Time @ 20 ° C 2 Minutes / 4 Minutes
    • Curing time @ 20 C 15 Minutes / 30-40 Minutes
    • linear shrinkage 0,2% / 0,15%
    • Advised coating thickness 4-30 mm / 30-40 mm

    Reviews

    Compare products Delete all products

    You can compare a maximum of 3 products

      Hide compare box
      Polyurethane casting system D70 Quick Set

      Polyurethane casting system D70 Quick Set

      € 14,95

      Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »