Back

AANGEPASTE VERZENDING WEGENS GESLOTEN OP CARNAVALSMAANDAG 24-02-2020

Sharkpoxy 1.67 kg. Set

  • Sharkpoxy 1.67 kg. Set

1-2 days

    € 49,90

    Add to wishlist

    • Fast shipping! Everything available from stock
    • Buy from the specialist
    • Shipping Worldwide
    • Not good? Money Back!
    Placeholder4.8

    Ratings

    Product description

    Sharkpoxy 1.67 kg. Set

    Crystal clear epoxy resin
    Food safe coating
    Swimming pool, water tank, aquarium, terrarium

    Read the full product description

    • High chemical and mechanical resistance
    • Medium viscosity making coating, laminating and bonding possible
    • Low toxicity for inhalation and skin contact
    • Excellent for the food industry
    • Odorless after treatment
    • Excellent adhesion on all types of materials
    • Crystal free

    Description

    Sharkpoxy is an epoxy resin with high chemical and mechanical resistance that (with accurate mixing ratio and nagehard on 40°C) is chemically stable related to food and water. This epoxy is designed specifically for building swimming pools (indoors), food products, water tanks, aquariums (also salt water), terraria, floors, etc. .. Aquapox can also be used for bonding or coating of stone, wood (root) or scenery.

    Technical data

    Mixing ratio (weight)
    Mixing ratio (Volume)

    [A:B]
    [A:B]

    100:67

    100:75

    Processing time @ 20°C*

    [min]

    50

    De-mould time @ 20°C *

    [hour]

    5

    Color

    [-]

    light yellow

    Shelf-life

    [year]

    2

    Density mix

    [g/cm3]

    1.10

    Mod of elasticity

     

    2300-2400

    Charpy impact strength

    [KJ/m2]

    32-39

    * At 25°C the process time: 30 minutes and curing time: 3 hours and 20 minutes

    Processing

    Mix the A-and B-component in the right proportion (weight: A:B = 100:67) and mix this well. You may want to include an epoxy dye and mix again until an you have an even color. The epoxy is now ready for processing. Apply the epoxy with a brush or roller and foresee the total surface with a thin layer. The second layer can best be made as the first layer has not yet been fully cured. If the first layer is cured, you can use sandpaper to create a good adhesion. Reinforcement of certain parts can be made by using fiberglass cloth. The final properties be achieved after the epoxy fully cured and is exposed to a temperature of 40°C for a few hours. (post curing).

    Important

    The best results are achieved if you accurately handle the mixing ratio.

    Process the product in a room where the temperature is between 18ºC and 30ºC, with a relative humidity below 80%.
    The pre-treatment of the surface goes like this:
    Wood: sheds, clean blow/suck
    Glass: degreasing, sanding, clean blow/suck
    Foam: brushing, blow/suck

    Shelf-life

    This epoxy resin is best stored in a dry place between 18°C and 28°C. The packaging must be fully closed to preserve the shelf life. If properly closed the epoxy resin has a 2 year shelf life.

    Safety

    The products are harmful to your health when  in liquid form. Contact with skin of one or both components must be prevented. Vapors of this product may cause respiratory irritation when used too long or frequently. When handling this product, wear protective gloves and protective glasses. Always work in a well ventilated area. For further information consult the safety data sheet.

    Product tags

    Compare products Delete all products

    You can compare a maximum of 3 products

      Hide compare box
      Sharkpoxy 1.67 kg. Set

      Sharkpoxy 1.67 kg. Set

      € 49,90

      Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »