These Silicones are ideal for making soap Moulds, Candle Moulds, Concrete moulds etc.Compare
The Silicone condenation DC 3481 with catalyst 3081 R is idealy suited to make molds for a...Compare
€28,50 € 26,95
Silicone Condensation Starter kit 20 is based on our 2-component (poly-condensation) casti...Compare
The Silicone condenation DC 3481 with catalyst 3081 F is idealy suited to make molds for c...Compare
€6,05 € 5,95
Silicone Thixo C is a thickening agent for all condensation curing silicone.Compare
€39,95 € 36,50
Silicone condensation HT 60 are highly filled and may be used to make molds for the castin...Compare
This kneadable condensation curing silicone is an ideal way to copy small and relatively f...Compare
Condensation silicone (RTV-2) hardener. 1 to 3% addition.Compare
Silicone Condensation Accelerator speeds up the curing process and shortens the demoulding...Compare
Condensation hardening Silicone (Tin silicone)
These silicones are very easy to use, because they are not easy to poison and therefore always cure.
The curing speed depends on the humidity and temperature. A temperature between 15 and 30 o C is ideal and an air humidity of more than 30% is desired. At lower temperatures or too low humidity, the curing takes a very long time. If the temperature is too high (> 60 ° C), it can happen that the silicones no longer cure.
Condensation silicones take over the smallest details, but can shrink over time.
Condensation silicones in cured form can withstand temperatures of -20 to + 180 o C.
Condensation silicones can secrete an oil. That is why not all condensation silicones are suitable for casting resins such as epoxy, clear PU or polyester. Use condensation silicones for this purpose, such as the 3481 R.