Silicone for polyurethane resin
Silicone Elastosil M 4601 A/B
€ 46,25 € 38,22 Excl. tax
Silicone Elastosil Wacker M4601 has a good resistance to casting resins (in particular, polyurethane) and low shrinkage. Very suitable for making strong, flexible and non greasy molds.
CompareSilicone Addition Pink 10
€ 26,75 € 22,11 Excl. tax
Very soft, but strong pink silicone. Ideal for casting soft silicone molds for fragile objects such as candles and soaps.
CompareSilicone Addition Transparent 15 Fast
€ 18,25 € 15,08 Excl. tax
The Silicone Addition Transparent 15 Fast is a 2-component (poly-addition) pourable silicone which, very rappidly, cures at room temperature to a quite soft but strong rubber silicone. This is a Skin safe and food grade silicone!
CompareSilicone Addition Transparent 15 Normal
€ 18,25 € 15,08 Excl. tax
A fairly soft silicone with good tensile strength. Food-safe and skin-friendly. A high quality 2-component casting silicone.
CompareSilicone Addition Transparent 25 Normal
€ 18,25 € 15,08 Excl. tax
The Transparent 25 Normal is a 2-component (Poly-Addition) casting silicone which hardens at room temperature to a medium hard and strong silicone rubber.
CompareSilicone Addition Transparent 40 Fast
€ 18,25 € 15,08 Excl. tax
The Silicone Addition Transparent 40 Fast is a 2-component (poly-addition) pourable silicone which, very rappidly, cures at room temperature to a strong rubber silicone that is relatively hard. This is a Skin safe and food grade silicone!
CompareSilicone Addition Transparent 40 Normal
€ 18,25 € 15,08 Excl. tax
The Silicone Additon Transparant Normal 40 is a 2-component (poly-addition) casting silicone which cures at room temperature to a strong rubber that is relatively hard.
CompareSilicone Addition Yellow 25 Set
€ 25,95 € 21,45 Excl. tax
For casting silicone molds and objects. This yellow silicone has an average hardness. Supplied in a set of two components, so you can get started easily.
CompareSilicone Condensation DC 3481 R
€ 24,95 € 20,62 Excl. tax
The Silicone condenation DC 3481 with catalyst 3081 R is idealy suited to make molds for aggressive resins like Epoxy, Polyester and Polyurethane.
Compare
