Casting wax Art Green
Casting Wax Art Green is a versatile, technically constructed, high-quality sculpture wax, ideal for painting and slushing casting. It is designed to have a wide application temperature range to meet all application areas. Cast Wax Art Green has additional benefits as it is formulated to reduce the associated defects from bulging and/or lifting without the need to paint edges or fasteners. This advantage is significant because the last part is identical to the artist's original design, which could otherwise be distorted. This advantage also reduces the need for extensive trimming and subsequent assembly times due to post-processing. In addition, this product still offers enough body to be used as a backup wax, making it a ONE WAX solution. The product is based on high quality petroleum and natural raw materials that provide consistent results and is naturally clean and has a very low ash residue
For larger quantities or customized products, please contact us via [email protected] or +31 (0)46-3030989.
Main benefits
• Improves recipe against curling and peeling of the mold wall
• Greatly improved dewaxing properties
• Improved hand shaping
Recommended Application Temperatures
Liquid Injection: 57-60°C
Paste Injection: 54-57°C
Technical data
| Characteristic | Method | Typical Value |
| Melting point | IP. 371 | 57.8°C |
| solidification point | IP.76 | † |
| Penetration @ 25°C (dmm) | IP. 49 | 15.6 |
| Penetration @ 43.4°C | ASTM D13210 | † |
| Viscosity @ 99°C (cSt) | IP.71 | 26 |
| Ash content (%, w/w) | DCF.2 | 0.006 max. |
| Colour | DCF.4 | Green |
| Filler percentage (%, w/w) | DCF.3 | 0 |
Important
Avoid overheating the wax (max. 100°C) and do not keep the wax at high temperatures for a long time. This causes the product to thermally degrade. Avoid skin contact with the molten material and avoid inhalation of vapours. See the relevant safety data sheet for more information.
Product information
EN - Product information Casting wax Art Green.pdf
