In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
- 30-day returns
- Over 100,000 happy customers
- Pay later with Klarna
- Personal advice from material experts
Question about this product? Our material experts are happy to help you choose the right product. Contact us
Volatile cyclic silicone fluid for cosmetic formulations
CM 50 Cyclopentasiloxane (D5) is a colourless, volatile silicone fluid from the cyclomethicone group. You use it as a base fluid in personal care products. With a viscosity of 4.0 mm²/s and a surface tension of 18.0 mN/m at 25 °C, CM 50 spreads excellently, rubs in easily and leaves no oily residue. Its specific gravity is 0.95 g/cm³, its flash point (closed cup) 77 °C and its boiling point 205 °C. The cyclotetrasiloxane (D4) content is below 1.0 %.
Key benefits
- Volatile carrier: evaporates and leaves no oily residue or build-up.
- Excellent spreading: thanks to the low surface tension of 18.0 mN/m.
- Silky skin feel: a soft, non-greasy finish.
- Widely compatible: mixes with many cosmetic ingredients and dissolves well in most anhydrous alcohols.
- Stable formulations: low use levels are sufficient.
Typical applications
- ✓ Antiperspirants and deodorants
- ✓ Hairsprays
- ✓ Skin creams and lotions
- ✓ Sticks, bath oils and sun care products
- ✓ Make-up and nail polish
Processing
- Use CM 50 on its own or blended with other cosmetic fluids as a liquid base for other cosmetic ingredients.
- CM 50 dissolves well in most anhydrous alcohols and in many cosmetic solvents.
- In sticks, use CM 50 to balance volatility and spreading.
- Keep containers closed as much as possible while working. CM 50 has a significant vapour pressure at room temperature.
Points of attention
- ✓ D5 falls under REACH Annex XVII, entry 70. Since 31 January 2020, wash-off cosmetics may contain no more than 0.1 % D5. For other cosmetics this limit applies from 6 June 2027. Since 6 June 2026 a general restriction also applies to D5 on its own and in mixtures, with a number of exemptions. Check in advance whether your application is permitted.
- ✓ Looking for an alternative for new formulations? Consider a linear, volatile dimethicone such as Silicone Oil 1.5 cSt or Silicone Oil 2 cSt.
- ✓ Take care at temperatures from 10 °C below the flash point of 77 °C. Keep containers closed and away from heat, sparks, open flames and other ignition sources.
- ✓ CM 50 has not been tested for, and is not considered suitable for, medical or pharmaceutical use.
- ✓ In its original unopened container at no more than 25 °C, CM 50 has a shelf life of 36 months from the date of manufacture. The expiry date is shown on the packaging. Never use an open flame to thaw frozen material.
Professional support
Want to replace D5 in your formulation, or not sure which volatile silicone suits you best? Email us at info@siliconesandmore.com and we will help you choose.
Product Properties
- Viscosity4mPa·sViscosity of the uncured silicone
- Density0.95g/cm³Density of the cured material
Application
- Silicone type["Auxiliary material"]Type of silicone or polymer
Safety Information
Work with CM 50 in a well-ventilated room and wear protective gloves and eye protection. Keep the product away from heat, sparks, open flames and other ignition sources, and keep it out of the reach of children. Always consult the supplied safety data sheet (SDS) for full information on hazards, handling, storage and first aid.| Safety Pictograms | Safety Data Sheets (SDS) |
|---|---|
Required protection (ISO 7010)
|
Frequently asked questions
What is the delivery time for my order?
Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.
Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.
What is the return policy?
You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.
How can I track my order?
As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.
I have a problem with my order – how do I reach you?
Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.
Can I order as a business?
Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.
EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.