Brown sculpture wax for fine detail, slush casting and backup

Precizioned SculptaCast Sedona is a general-purpose brown sculpture wax for brushing and slush casting. Its low viscosity and good flow let you brush and slush fine details. The moderate setting speed also makes it suitable as a backup wax. Sedona has moderate stiffness, polishes well and blends easily with other sculpture waxes in the SculptaCast range. The wax is based on petroleum raw materials, has a drop melt point of 64 ± 4 °C and leaves 0.005 % ash.

Key benefits

• Fine detail: low viscosity of 14.5 cps at 93 °C and good flow.
• Also as backup: thanks to the moderate setting speed.
• Less lifting from the mould wall: less curling and flaking from the wall.
• Polishes well: moderate stiffness and high polishability.
• Blendable: combine with other SculptaCast waxes for your own blend.
• Clean burnout: ash content 0.005 %.

Typical applications

• ✓ Brushing detail into a mould
• ✓ Slush casting hollow wax patterns
• ✓ Backup wax behind a brushed layer
• ✓ Custom wax blends with other SculptaCast waxes

Processing

1. Melt the wax carefully and do not heat it above 100 °C.
2. Brush the first layer into the mould for the detail.
3. Build up the wall thickness by slushing, or use the same wax as backup.
4. For different properties, blend Sedona with another SculptaCast wax and test the blend first.
5. Let the wax cool and demould the pattern.

Points to note

• ✓ Do not heat the wax above 100 °C and do not keep it at high temperature for long. Otherwise the product degrades thermally.
• ✓ Avoid skin contact with molten wax and do not inhale the fumes.

Professional support

Not sure which sculpture wax or blend best suits your pattern? Email us at info@siliconesandmore.com and we will be happy to help.