Back

Silicone Oil 200 cSt (quite liquid)

  • Silicone Oil 200 cSt (quite liquid)
  • Silicone Oil 200 cSt (quite liquid)
  • Silicone Oil 200 cSt (quite liquid)
  • Silicone Oil 200 cSt (quite liquid)

1-2 days

    With silicone oil 200 cSt, you can easily change the hardness / Shore (stiffness), fluidity and elasticity of silicone.

    € 12,-

    Add to wishlist

    • Fast shipping! Everything available from stock
    • Buy from the specialist
    • Shipping Worldwide
    • Not good? Money Back!
    Placeholder4.8

    Ratings

    Product description

    Silicone Oil 200 cSt (quite liquid)

    • Easy to add
    • For addition and condensation silicone
    • Colorless and odorless
    • Safe to use
    • Very thin liquid / Low viscosity (200 cSt)

    Description 

    This silicone oil can be used in all pourable silicone in this webshop.

    This highly liquid silicone oil 200 cSt. can be added to pourable silicone so that it will be softer and more flexible. By adding the oil, the silicone will be more fluid too and after curing it will be more elastic. The oil can also be used to manually smooth out thickened silicone that has been brushed onto a surface.

    Technical data

    Viscosity

    (cSt)

    200

    Ignition Temperature

    (oC)

    > 300

    Freezing point

    (oC)

    -50

    Density @ 25°C

     

    0.97

    surface tension

    mN / m

    21.0

    Refractive Index @ 25°C

     

    1.403

    Processing 

    Take the desired amount of the silicone A component and add the appropriate amount of B-component (shown in the data sheet of your silicone). Stir the mixture well. Add the silicone oil to the silicone mixture. By varying between 1% and 15% (weight) oil, you can decide how much softer / flexible the end result will be.

    Adding 8% oil is seen by many people to be an adequate reduction of the hardness (about 3-5 shore points) and is recommended. Adding more than 10% of the oil can have unacceptable impact on the final strength of the cured silicone and is therefore not recommended. 

    You can also add the silicone oil with the aim of making the silicon more liquid. This will make the silicone fluid better self deaerating. In this case too we do not recommend to add more than 10%. 

    Special instructions

    The addition of silicone oil is a form of adjusting your silicones. You should be aware that the final values, will differ from the values indicated on the data sheets of the silicone. 

    Oil does not actively  participate in the silicone network. This means it will be able to migrate out of the silicone over many years. This proces is sped up when the silicone are under pressure or bend. This will result in a greasy layer on the silicone surface and possible shrinkage of the rubber.

    Shelf life

    At least 5 years.

    Product information

    Product information Silicone Oil 200 cSt

    Reviews

    Compare products Delete all products

    You can compare a maximum of 3 products

      Hide compare box
      Silicone Oil 200 cSt (quite liquid)

      Silicone Oil 200 cSt (quite liquid)

      € 12,-

      Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »