Auxiliary products for silicone Auxiliary products for silicone, epoxy, PU, and composite. Choose lighter, stronger, or more processable options with hollow glass beads (microballoons/glass bubbles), control viscosity with fumed silica (thixotropic agent), or improve adhesion and finish with silicone primer and LSR topcoat . Clean and degrease with Kirasol 318...
✔ Thickener for liquid silicone, polyester, epoxy, or PU.
✔ White powder
✔ Dissolves colorless / transparent with good mixing
✔ Increases the hardness (shore value) of silicone
✔ Decreases the density of material
✔ Filler grain for PU, silicone, epoxy, polyester, plaster, concrete, cement
✔ Extends the processing time
✔ Exothermic cast products can be cast thicker
The powder is ideal to eliminate the non-slipping character of silicone, but can also be used for a fine discharge between two layers of addition silicones.
✔ready-to-use, one-component system
✔low module
✔excellent primerless adhesion to many substrates
✔no use of organotin catalysts
✔ Flexible at low (-40 °C) and high temperatures (+180 °C)
✔Flowable
✔Low viscosity
✔Solvent-based
✔ Recommended operating temperature from -45 °C to +180 °C
✔ Neutral curing (Alkoxy), no acid
✔ Sprayable
✔ Good adhesion to many substrates without primer
✔ One component
✔ Solvent free
✔ Self-Leveling
✔ Recommended service temperature from -45 °C to +230 °C
✔ max. recommended short term peak temperature exposure 250°C
✔ non-thixotropic
✔ Flowable
✔ Heat resistant
✔ Low viscosity
✔ One-component
✔ Solvent-free
✔ Increases the adhesion between condensation and addition curing silicone and various surfaces
✔ Functions on metals, wood, various plastics such as PETG
✔ Soluble in white spirit or alcohol
✔ Works with silicones with a high oil content
✔ Increases the adhesion between condensation and addition curing silicone and various surfaces
✔ Used for Arresters, Cable Accessories, Insulators
✔Organic solvent, free of toluene and aromatic solvents
✔ Provides excellent adhesion onto various substrates.
✔ For addition curing silicone
✔ Solvent based
✔ Various application methods (e.g. coating, dipping, brushing, spraying)
✔ Further dilution in organic solvents possible
✔ Food grade
✔ One component acid-based curing system.
✔ Self-leveling.
✔ Excellent adhesion on various surfaces
✔ Colorless transparent
✔ Good mechanical properties
✔ Heat resistant
✔ Resistant to weather influences and aging
✔ Permeable to gas and water vapor
✔ One component acid-based curing system.
✔ Self-leveling.
✔ Excellent adhesion on various surfaces
✔ Colorless transparent or Black
✔ Good mechanical properties
✔ Heat resistant
✔ Resistant to weather influences and aging
✔ Permeable to gas and water vapor
✔ One component acid-based curing system.
✔ Self-leveling.
✔ Excellent adhesion on various surfaces
✔ Colorless transparent or Black
✔ Good mechanical properties
✔ Heat resistant
✔ Resistant to weather influences and aging
✔ Permeable to gas and water vapor
✔Easily emulsified
✔ Good compatibility with cosmetic ingredients
✔ Resistant to oxidation
✔ Good non-stick properties
✔ Gives shine, softness and better manageability to the hair
✔ Very good adhesion to silicone substrates
✔ High elongation
✔ High reactivity
✔ Neutral odour and taste (FDA)
✔ Excellent stability and flexibility at low temperatures
✔ Suitable for compliance with the food contact regulations
Chemlease® Mold Cleaner EZ is a special blend of solvents designed to dissolve and remove wax and dirt from composite molds.
Auxiliary products for silicone
Auxiliary products for silicone, epoxy, PU, and composite. Choose lighter, stronger, or more processable options with hollow glass beads (microballoons/glass bubbles), control viscosity with fumed silica (thixotropic agent), or improve adhesion and finish with silicone primer and LSR topcoat .
Clean and degrease with Kirasol 318 SC and Chemlease Mold Cleaner EZ for optimal results.
Quick overview (what does what?)
Filler Hollow Glass Beads
Lightweight filler, easy to sand; density ↓, filling ↑
Filler Fumed Silica 150 g
Thixotropic/anti-sagging for silicone, epoxy, PU
Talcum powder Finntalc M-30-SQ
Matting, anti-blocking, slip control in resins/coatings
Silicone Primer WACKER G795
Adhesion promoter for silicone rubber on glass, metal, ceramics
LSR Topcoat HE
Mattifying, wear-resistant, friction-reducing topcoat (heat-cure) for LSR/HTV
SAM Deadener 1000
Platinum silicone deadener; "skin-like" feel for SFX/prosthetics
Phenyl Trimethicone
INCI silicone for shine, spreading, rub/water resistance
Kirasol 318 SC
Industrial degreaser/oil emulsifier (low-foam) for pretreatment
Chemlease Mold Cleaner EZ
Mold cleaner for tooling; fast and low-residue
Fillers & rheology
Hollow glass beads (microballoons)
Reduces weight and shrinkage; ideal for body fillers, kneadable fillers, and lightweight laminates. Compatible with epoxy, PU, and polyester.
Fumed silica (Aerosil)
Adds stability to brush heads and vertical layers. Small dose, big effect. Insert last, disperse gently.
Talcum powder finntalc M-30-SQ
Gloss control and fine matte; improves scratch resistance and feel in coatings/plastics.
Primers & coatings for silicone
Silicone Primer WACKER G795
Improved adhesion of LSR/RTV to glass, metal, ceramics, and select plastics. Clean first (e.g., Kirasol 318 SC), apply a thin layer, flash, and apply inside the window.
LSR Topcoat HE (Heat-Cure)
A clear topcoat that reduces gloss, increases wear resistance, and reduces friction. Perfect for medical/technical silicone parts.
Additives for feel & finish
SAM Deadener 1000
For addition/platinum silicone. Reduces elasticity towards a gel-like, "skin-like" behavior. Build up dosage; continue to monitor tear/strength.
Phenyl Trimethicone
Cosmetic silicone (INCI) with high shine and spreadability; improves rub/water resistance. Used in skincare/haircare and as a high-gloss additive.
Cleaners & degreasers
Kirasol 318 SC - Industrial Degreaser
Low-foam cleaner that emulsifies oil and residue. Ideal before priming/coating or release agent application.
Chemlease Mold Cleaner EZ
Fast-acting, low-residue mold cleaner for composite/PU/gelcoat. Improves release consistency and tool life.
FAQ
Glass beads or fumed silica?
Glass beads reduce weight and improve abrasiveness; fumed silica controls viscosity/sag. Often combined.
Does G795 adhere to any plastic?
Not on all surfaces. Always test and apply the correct pretreatment. Ask for advice on difficult substrates.
Does SAM Deadener also work with condensation silicone?
Developed for platinum/addition. Test small amounts first or choose an alternative for tin/condensation.
Advice & order
Ready to choose? We'll help you with dosage, compatibility, and process settings for hollow glass beads, fumed silica, silicone primer WACKER G795, LSR Topcoat HE, SAM Deadener 1000, phenyl trimethicone, Kirasol 318 SC, and Chemlease Mold Cleaner EZ.
