Back

Stensil ECO 30 Sand, malleable silicone Shore A 30

  • Stensil ECO 30 Sand, malleable silicone Shore A 30

In stock

  • Article code: S11449

✔ Kneadable silicone, Strong, Sand
✔ Shore (A) 30
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100

€ 21,-
€ 17,36 Excl. tax

Add to wishlist

Buy now Pay in 14 days with Klarna

  • Fast shipping! Everything available from stock
  • Buy from the specialist
  • Extended internal Laboratory
  • More than half a million satisfied customers
Placeholder4.82

Uitstekend

Product description

Stensil ECO 30 Sand, malleable silicone Shore A 30

The Stensil ECO 30 malleable silicone, is a 2 component (Poly-Addition) malleable silicone that cures at room temperature. The silicones are very easy to mix and process by hand. The silicones are ready for use after just 5 minutes.

  • Easy to process kneadable paste
  • Fairly resistant to acidic/more aggressive substances
  • Low shrinkage (<0.1%)
  • De-mold time 5 min

Technical data

  • Mixing ratio: A:B= 1:1
  • Processing time at 20°C: 1.5 minutes
  • Demolding time at 20°C: 5 minutes
  • Full strength after: 1 day
  • Hardness: shore A 30
  • Density: 1.68 g/cm³
  • Color: Sand color
  • Liquidity: Paste

Note: Potlife/demolding time strongly depends on temperature! At a higher temperature, the processing time and demolding time are shorter.

Processing

The Stensil ECO 30 can easily be mixed by (clean) hand. Knead the A and B component carefully and in the indicated proportion (1 part A and 1 part B by weight). Process the silicone within the processing time and wait with de-moulding until the whole has hardened completely and is no longer sticky.

Note: This is an addition silicone. These silicones can be poisoned by sulfur, nitrogen, amino compounds and metal salts. If you are not sure whether the products you use (including gloves, spatulas and cups) contain these ingredients, do a small test first. These substances are found in many latex gloves, some plastilines, lacquers and adhesives, condensation silicones, 1-component silicone sealant, natural rubbers and 3D printing material (especially stereolithography). If you still want to use this, you will have to put on a protective layer of polyvinyl alcohol .

Shelf life

Provided that the silicone is stored in (re)closed packaging, cool and frost-free, the shelf life is at least 1 year.

Safety requirements

If you often work with the silicone, it is recommended to wear gloves during processing and to ventilate the room well. For safety instructions, please refer to the safety data sheet.

Product information

EN - Product Information Stensil ECO Silicone.pdf

SDB STENSIL ECO, EN.pdf

 

 

Specifications

Specifications for: Stensil ECO 30 Sand, malleable silicone Shore A 30

  • Shore (A) 30
  • Color A Comp. Grey
  • Color B Comp. Sand
  • end Color Sand
  • cured density 1,68 g/cm3
  • View all specifications
  • viscosity mixture Paste
  • Mixing ratio A/ B 1:1
  • Working Time 90 Secondes @20°C
  • Curing time 5 Minutes @20°C
  • tensile strength -
  • extensibility -
  • tear Strength -
  • Linear shrinkage<0,1%
  • Curing method Neutral
  • Volume resistivity Not measured
  • Permittivity Not measured
  • Heat capacity [Kj/Kg Kelvin] NA
  • Heat conductivity [W/mK] NA
  • Product category

Product tags

Do you have a question about this product?

Do you have a question about this product?

Our employee is happy to help you find the right product

Related products

Recently viewed

    • Silconic Stensil ECO 30 Sand

    Stensil ECO 30 Sand

    € 21,- € 17,36 Excl. tax

    ✔ Kneadable silicone, Strong, Sand
    ✔ Shore (A) 30
    ✔ Low shrinkage (< 0.1 %)
    ✔ 90 Seconds working time @ 20°C
    ✔ Mixing Ver. (Weight)100:100

    Compare
      Compare products Delete all products

      You can compare a maximum of 3 products

        Hide compare box
        Stensil ECO 30 Sand, malleable silicone Shore A 30

        Stensil ECO 30 Sand, malleable silicone Shore A 30

        € 21,-

        Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »