✔ 3-4% dosage
✔ dry, stretchy result
✔ Can be used neat or mixed
✔ Low shrinkage (< 0.3%)
✔ More resistant to PU and Epoxy
✔ Mixing ratio (Weight)100:5
✔ Long processing time
✔ Very fast
✔ Low dosage
✔ Can be used neat or mixed
✔ Retain properties of other hardener at low dosage
✔ Low shrinkage (< 0.3 %)
✔ 5 minutes working time
✔ Mixing ratio (Weight) 100:2
✔ 5% dosage<!--en-->✔ Dry, flexible result<!--en-->✔ Can be used pure or mixed<!--en-->✔ Low shrinkage (< 0.3%)<!--en-->✔ Better resistance to polyester<!--en-->✔ Mixing ratio (Weight) 100:5
✔ Very good flowability and self-deaeration
✔ Low Shore A hardness (approx. 25)
✔ Excellent tear strength
✔ High elongation and flexibility
✔ Excellent chemical resistance to attack by polyester and polyurethane resins, significantly extending mould life
✔ Very good flowability and self-deaeration
✔ Low Shore A hardness (approximately 25)
✔ Excellent tear strength
✔ High elongation and flexibility
✔ Excellent chemical resistance to attack by polyester and polyurethane resins, mould life is significantly extended
