Back

UltraCast XT Epoxyresin Crystal Clear heat resistant till 95°C

  • UltraCast XT Epoxyresin Crystal Clear heat resistant till 95°C
  • UltraCast XT Epoxyresin Crystal Clear heat resistant till 95°C

1-2 days

    € 24,85

    Add to wishlist

    • Fast shipping! Everything available from stock
    • Buy from the specialist
    • Shipping Worldwide
    • Not good? Money Back!
    Placeholder4.8

    Ratings

    Product description

    UltraCast XT Epoxyresin Crystal Clear heat resistant till 95°C

    UltraCast XT is a clear resin with a heat resistance up to 95 ° C. Suitable for coating kitchen tops and casting coasters.

    Read the full product description

    • High temperature resistance up to 95°C
    • Crystal clear
    • Suitable for Coating kitchen tops and tables
    • Suitable for casting coasters up to 5 mm thick
    • UV stable
    • High gloss
    • Long pot life
    • High chemical resistance
    • Good viscosity what makes casting and coating easy
    • Solvent free
    • Odorless after treatment
    • Excellent adhesion on all types of materials
    • Suitable for food-safe coating

    UltraCast XT

    ++BLUE++Ultra Cast XT is an epoxy resin which once cured gives a very clear results with a heat resistance up to 90°C.++ENDBLUE++

    Description

    Ultra Cast XT is an epoxy resin that cures at room temperature and gives a very transparent end result. The Ultra XT Cast Epoxy has a high chemical and temperature resistance and can even be exposed to temperatures up to 90°C. The epoxy is solvent free making processing less dangerous. The Ultra Cast XT can be used for coating for example, table tops, bar tops, counters or kitchen blades but can also be used for casting of coasters, resin-art or a coin floor.

    Technical data

    Mixing ratio (in weight)

    [A:B]

    100:50

    Processing time @ 20°C*

    [min]

    90

    De-mould time @ 20°C*

    [hour]

    24

    Time to fully cure

    [days]

    14-21

    Color

    [-]

    Colourless, clear

    * The above values are at a mixture with a total volume of 250 grams. At larger volumes and/or at an ambient temperature higher than 20°C the process time is shortened.

    Processing

    Add the component A and B in the right proportion (weight: A:B = 100:50) and mix this well. You may want to include an epoxy dye and mix again until an even color. The epoxy is now ready to be cast. Apply the epoxy with a brush or roller to provide the total surface of a thin layer. If necessary apply a second layer. This can best be done if the first layer has not been fully cured yet. Reinforcement of certain parts can be made by using fiberglass cloth. The final properties of Ultra Cast XT are achieved after the epoxy is fully cured (24 hours).

    Casting a 0,5 mm layer takes 0,5 Liter per 1m2

    Brushing a 3 micrometer layer takes 0,25 Liter er 1m2

    Important

    The best results are achieved if you handle the mixing ratio accurately . Process the product in a room where the temperature is between 18 and 30°C. Because the Ultra XT Cast has a long processing time this epoxy is prone to high humidity. Also ventilation of air (wind) and air conditioning can affect the curing of the epoxy. If you add "too much"  dye or alcohol you may also experience problems with the curing.

    Adding too much filler or dye may lower heat resistance. In that case we advice adding an extra unfilled layer.

    Packing

    Ultra Cast XT comes in a set of: 750 grams, 1.5 kilo, 7.5 kilo and 15 kilo.

    Shelf life

    This epoxy is best stored in a dry place between 18° c and 28 °C. Opened packaging must be carefully closed to preserve the shelf life. If properly closed the epoxy has a shelf life around 2 years.

    Safety

    The products are harmful to your health when  in liquid form. Contact with skin of one or both components must be prevented. Vapors of this product may cause respiratory irritation when used too long or frequently. When handling this product, wear protective gloves and protective glasses. Always work in a well ventilated area. For further information consult the safety data sheet.

    Specifications

    Specifications for: UltraCast XT Epoxyresin Crystal Clear heat resistant till 95°C

    • Color A Comp. Clear Colorless
    • Color B Comp. Clear Colorless
    • end Color Clear Colorless
    • cured density 1.12 g/cm3
    • viscosity mixture 1500 mPa s
    • View all specifications
    • Mixing ratio A/ B 100:50
    • Working Time 60 minutes at 20°C
    • Curing time 24 hours at 20°C
    • UV-blocker Yes
    • Maximum casting thickness 25 mm.
    • Minimum casting thickness<1 mm.
    • Maximum temperature resistance cured up to 95 ° C
    • Viscosity (fluidity) good liquid
    • Mainly used for Clear lacquering of, among other things, kitchen tops. Unique heat resistance up to 95 ° C
    Media

    Product tags

    Reviews

    User reviews 4 / 5Reviews:(1)

    • CG By Cornee Grefkens - 11-05-2020 22:39

      4 / 5

      Fijne epoxy om mee te werken alleen niet erg kras bestendig. Ik zou hem niet op mijn keukenblad willen gebruiken. Blijft goed vloeibaar en de kleuren komen er mooi in uit. Houdt er wel rekening mee dat als je naast poeder pigment ook pasta gebruikte, de pasta bij het opwarmen van de luchtbellen boven komt drijven.

    Compare products Delete all products

    You can compare a maximum of 3 products

      Hide compare box
      UltraCast XT Epoxyresin Crystal Clear heat resistant till 95°C

      UltraCast XT Epoxyresin Crystal Clear heat resistant till 95°C

      € 24,85

      Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »