✔ Silicone-free wax-based release spray
✔ Abrasion-resistant film, multiple demoldings per coat
✔ Can be polished to a glossy surface
✔ Active material density 0.76 g/cm³
✔ 500 ml aerosol can
✔ Wax-containing release spray for model making
✔ Strongly adhering, uniform release film
✔ Good sliding properties, very high release reserve
✔ Silicone-free
✔ Active material density 0.72 g/cm³
✔ 500 ml aerosol can
✔ Semi-permanent release agent for composite moulds
✔ Multiple releases per application
✔ Minimal transfer to the part
✔ Highest slip in the PMR family
✔ 4 to 5 coats, production-ready after 30 minutes
✔ Packaging 3.4 kg
✔ Water-soluble barrier coat of polyvinyl alcohol
✔ Reduces the risk of addition-cure silicone inhibition
✔ Protects natural stone from silicone oil
✔ Quick and easy to apply
✔ Washes off with water after demoulding
✔ Medium-duty silicone release spray
✔ For wax, plastics and rubber
✔ Does not build up in the mould
✔ 360° spray head, even upside down
✔ 400 ml aerosol
✔ Very thin liquid (low viscous) 10 cSt
✔ Making silicone softer, more stretchable, flexible
✔ Ignition temperature: 162 °C
✔ Freezing point: -65 ° C
✔ Colorless and odorless
✔ Medium viscosity: 350 cSt
✔ Flash point: >300 °C
✔ Pour point: -50 °C
✔ Makes silicones softer, more stretchable and more flexible
✔ Colourless and tasteless
✔ Food grade (PC): EC 1935/2004, FDA 21 CFR 173.340 and 177.2600
✔ Very thin liquid (low viscosity) 5 cSt
✔ Makes silicones softer, more stretchable, and more flexible
✔ Ignition temperature: 136°C
✔ Freezing point: -65°C
✔ Colorless and odorless
✔ Wax-based release paste, yellow
✔ Spreadable at room temperature
✔ Seals the pores of the master model
✔ For silicone, polyester, vinyl ester and epoxy
✔ 400 g tin with sponge
✔ Shelf life at least 3 years
✔ Minimal change in physical properties over a wide temperature range
✔ Excellent water-repellent properties
✔ Good dielectric properties
✔ Low surface tension and therefore high surface activity
✔ Highly chemically inert
✔ Low pour point (-60°C)
✔ High flash point (>205°C)
✔ Good solubility in a wide range of solvents
✔ Non-curing, petroleum-jelly-like silicone paste
✔ Water-repellent, gives a degree of corrosion protection
✔ Lubricant and assembly aid for O-rings
✔ Heat-resistant release agent
✔ Electrically insulating, high dielectric strength
✔ Good adhesion to metal, glass and ceramics
