Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.
Main application: making molds for concrete castin., food contact (FDA/ BfR compliant).
✔ minimal change in physical properties over a wide temperature range
✔ excellent water repellent properties
✔ good dielectric properties
✔ low surface tension and therefore high surface activity
✔ high chemical inertness
✔ low pour point and high flash point
✔ good solubility in a wide range of solvents
✔ Minimal change in physical properties over a wide temperature range
✔ Excellent water-repellent properties
✔ Good dielectric properties
✔ Low surface tension and therefore high surface activity
✔ Highly chemically inert
✔ Low pour point (-60°C)
✔ High flash point (>205°C)
✔ Good solubility in a wide range of solvents
✔ minimal change in physical properties over a wide temperature range<!--en-->✔ excellent water-repellent properties<!--en-->✔ good dielectric properties<!--en-->✔ low surface tension and thus high surface activity<!--en-->✔ high chemical inertness<!--en-->✔ low pour point and high flash point<!--en-->✔ good solubility in a wide range of solvents
✔ 3-4% dosage
✔ dry, stretchy result
✔ Can be used neat or mixed
✔ Low shrinkage (< 0.3%)
✔ More resistant to PU and Epoxy
✔ Mixing ratio (Weight)100:5
✔ Long processing time
✔ Very fast
✔ Low dosage
✔ Can be used neat or mixed
✔ Retain properties of other hardener at low dosage
✔ Low shrinkage (< 0.3 %)
✔ 5 minutes working time
✔ Mixing ratio (Weight) 100:2
✔ 5% dosage<!--en-->✔ Dry, flexible result<!--en-->✔ Can be used pure or mixed<!--en-->✔ Low shrinkage (< 0.3%)<!--en-->✔ Better resistance to polyester<!--en-->✔ Mixing ratio (Weight) 100:5
✔ Very good flowability and self-deaeration
✔ Low Shore A hardness (approx. 25)
✔ Excellent tear strength
✔ High elongation and flexibility
✔ Excellent chemical resistance to attack by polyester and polyurethane resins, significantly extending mould life
✔ Very good flowability and self-deaeration
✔ Low Shore A hardness (approximately 25)
✔ Excellent tear strength
✔ High elongation and flexibility
✔ Excellent chemical resistance to attack by polyester and polyurethane resins, mould life is significantly extended
✔ High-quality silicone from Wacker
✔ Fast and non-shrink curing at room temperature
✔Shore A 43
✔ Transparent
✔High tear strength
✔ Food safe (FDA)
✔ Excellent resistance to casting resins
✔ Very suitable for clear casting resins
✔ Provides excellent adhesion onto various substrates.
✔ For addition curing silicone
✔ Solvent based
✔ Various application methods (e.g. coating, dipping, brushing, spraying)
✔ Further dilution in organic solvents possible
✔ Suitable for the production of reusable silicone vacuum bags.
✔ Fast curing at room temperature
✔ No chemical shrinkage
✔ Resistance to epoxy resins
✔ Resistance to polyester
✔ Two components 1:1
✔ Blue / Transparent
✔ One component acid-based curing system.
✔ Self-leveling.
✔ Excellent adhesion on various surfaces
✔ Colorless transparent or Black
✔ Good mechanical properties
✔ Heat resistant
✔ Resistant to weather influences and aging
✔ Permeable to gas and water vapor
Pourable, addition-curing two-component silicone rubber that vulcanizes at room temperature. Main application: silicone surface for printing rollers, making molds for casting low-melting metal alloys.
✔ Very Hard, Heat resistant up to 380 ° C
✔ Red, Liquid, Non-Bleeding
✔ Shore (A) 60
✔ Low shrinkage (<0.8%)
✔ 40 minutes of working time
✔ Mixing ratio. (Weight) 100: 2
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.
Main application: making molds for concrete castin., food contact (FDA/ BfR compliant).
✔ very good flow<!--en-->✔ fast and shrinkage-free curing <!--en-->✔ average Shore A hardness (A 37)<!--en-->✔ high tear strength <!--en-->✔ long-term stability<!--en-->✔ excellent resistance to common casting resins
✔ Transparent addition-curing silicone (platinum-cure), Shore A 40
✔ Excellent resistance to casting resins (polyurethane and epoxy)
✔ High tear strength > 25 N/mm for a long mold life
✔ Shrink-free curing (linear shrinkage ≤ 0.1 %)
✔ Mixing ratio 10 : 1, pot life approx. 80 minutes
✔ Slightly oily for better demolding
✔ High-quality silicone from Wacker
✔ Fast and non-shrink curing at room temperature
✔ Shore A 55
✔ Food safe (FDA / BfR compliant)
✔ High tear strength
✔ Stable mechanical properties
✔ Excellent resistance to casting resins
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.
Main application: Making printing pads, food contact (FDA/ BfR compliant).
✔ Shore A 31 — middelhard, optimaal voor pad-printing
✔ Pot life 30 minuten, ontvormen na 5 uur
✔ Mengverhouding 9:1 (A:B) op gewicht
✔ Scheursterkte 30 N/mm — lange padlevensduur
✔ Krimpvrije uitharding bij kamertemperatuur
✔ Easy to process due to low viscosity
✔ Fast and shrink-free curing at room temperature
✔ Low Shore A hardness (approx. 25)
✔ High elongation, excellent tensile strength
✔ Excellent tear strength
✔ Cured rubber is transparent and colourless
✔Antistatic surface
✔Good flowability
✔High reactivity even when large amounts of silicone oil are added
✔Fast and shrink-free curing at room temperature
✔Medium hardness (Shore A approx. 31)
✔Excellent mechanical properties
✔ Increases the adhesion between condensation and addition curing silicone and various surfaces
✔ Functions on metals, wood, various plastics such as PETG
✔ Soluble in white spirit or alcohol
✔ Works with silicones with a high oil content
✔ Increases the adhesion between condensation and addition curing silicone and various surfaces
✔ Used for Arresters, Cable Accessories, Insulators
✔Organic solvent, free of toluene and aromatic solvents
