ornaments
How to copy ornaments using silicone molds
B2 - B component for Silicone Condensation 20 universal
€ 6,99 € 5,78 Excl. tax
✔ Low dosage (2%)
Compare
✔ Low shrinkage (< 0.3 %)
✔ Mixing ratio (Weight) 100:2
✔ Works on most condensation curing siliconesFiller Fillite 355
€ 150,- € 123,97 Excl. tax
✔ Decreases the density of material
Compare
✔ Filler grain for PU, silicone, epoxy, polyester, plaster, concrete, cement
✔ Extends the processing time
✔ Exothermic cast products can be cast thickerGlass Fibres 3 Mm
€ 10,- € 8,26 Excl. tax
✔ For reinforcement of polyester, polyurethane, epoxy, acrylic resin and silicone
Compare
✔ A cheap filler
✔ Easy to doseEpoxy support Glassfiber Cover
€ 199,- € 164,46 Excl. tax
✔ Strong, fiberglass filled
Compare
✔ Malleable
✔ Blue
✔ Support cover Thickness +/- 5 mm
✔ 20-30 minutes working time
✔ Mixing ratio (Weight) 100: 5Acrylic resin Thixo
€ 4,95 € 4,09 Excl. tax
Acrylic resin Thixo is an additive to thicken the Acrylic resin set. This way you can make gels or paste like material.
CompareGlass Fibres 12 mm.
€ 10,- € 8,26 Excl. tax
✔ For reinforcement of polyester, polyurethane, epoxy, acrylic resin and silicone
Compare
✔ A cheap filler
✔ Easy to doseEpoxy Support Cap EPOPAST 402/400
€ 338,- € 279,34 Excl. tax
✔ Low odor
Compare
✔ Low density
✔ Easy processing
✔ Temperature resistant 70°CT51 B component for condensatie silicone
€ 6,05 € 5,- Excl. tax
✔ 5% dosage
Compare
✔ dry, stretchy result
✔ Can be used neat or mixed
✔ Low shrinkage (< 0.3%)
✔ Better resistance to polyester
✔ Mixing ratio (Weight) 100:5Silicone Condensation 35 A component
€ 13,31 € 11,- Excl. tax
✔ Flexible, Strong, Universal
Compare
✔ White, relatively good Liquid, Bleeding
✔ Shore (A) 32-37 medium hard
✔ Stretchable > 400%
✔ Low shrinkage (< 0.3 %)Silicone Condensation 5 A component - Soft
€ 13,31 € 11,- Excl. tax
✔ Flexible, Strong, Universal
Compare
✔ White, Good Flow, Bleeding
✔ Shore (A) 3-7 soft
✔ Stretchable > 400%
✔ Low shrinkage (< 0.3 %)
Ornaments are a wonderful way to decorate a building. You can invent and make ornaments yourself, or repair an existing ornament or duplicate an ornament so it can be used in another place.
For all of these applications silicones are the material of choice to make molds of your ornaments with. When you create the ornament yourself from clay or another material, you can use silicone to make a mold and make many reproductions with concrete, cement, plaster, acrylic resin etc.
If you want to copy or repair an ornament that cannot be taken down from the wall or from the ceiling you can simple thicken the silicone and brush it against the ornament. When it has hardend you can make a support cap so the silicone mold will keep its shape.
For models or originals that are very porous or soak up oil easily we advise the use of addition curing silicone as this will stain less. It is even better to protect the surface with poly vinyl alcohol. THis can later be washed off with water (please do a small test first).
Silicones are thickened with thixo or fused silica powder. Support Caps are esay to make withsupport cap epoxy or acrylic resin or plaster with fiberglass mats.