Scenography and props
Silicone molds and casting resins for sets and props
SculptaClay Brown Firm
✔A firm formulation designed for heavy carving and fine detailing
✔ Excellent for hand shaping or modeling
✔ Bonds easily to itself and other waxes
✔ Carves like soft clay
✔ Designed with casting in mind, with an extremely low ash content€ 83,44 € 68,96 Excl. tax
CompareCarbonfibre tape 200g/m² , 100 mm
Carbon fabric tape for easy finishing of objects and for reinforcement of corners and seams. Can also be used for winding / reinforcing pipes, rackets and hockey sticks.
€ 4,50 € 3,72 Excl. tax
CompareSilicone Addition Yellow 25 Set
✔ Flexible, Strong
✔ Yellow
✔ Shore (A) 25 (Moderately Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100€ 31,50 € 26,03 Excl. tax
CompareT47 B component for condensation silicone
✔ Very fast
✔ Low dosage
✔ Can be used neat or mixed
✔ Retain properties of other hardener at low dosage
✔ Low shrinkage (< 0.3 %)
✔ 5 minutes working time
✔ Mixing ratio (Weight) 100:2€ 6,05 € 5,- Excl. tax
CompareSculptaClay Grey Medium
✔ A medium formulation ideal for light carving that allows for easy manipulation while maintaining structure
✔ Excellent for hand shaping or modeling
✔ Bonds easily to itself and other waxes
✔ Carves like soft clay
✔ Designed with casting in mind, wit€ 83,44 € 68,96 Excl. tax
CompareT40 B component for condensatie silicone
✔ 2-3% dosage
✔ Medium fast
✔ Can be used pure or mixed
✔ Low shrinkage (< 0.3%)€ 5,87 € 4,85 Excl. tax
CompareSilicone Condensation 20 for Polyester
✔ Flexible, Strong, good resistance to polyester
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 120 minutes working time
✔ Mix ratio (Weight) 100:5€ 19,18 € 15,85 Excl. tax
CompareEpoxy Support Cap EPOPAST 402/400
✔ Low odor
✔ Low density
✔ Easy processing
✔ Temperature resistant 70°C€ 338,- € 279,34 Excl. tax
CompareElastosil FX Thixo
The Wacker FX Thixo is a thickener especially for the Wacker FX silicone. This makes the silicone thicker to pasty.
€ 25,95 € 21,45 Excl. tax
CompareT51 B component for condensatie silicone
✔ 5% dosage
✔ dry, stretchy result
✔ Can be used neat or mixed
✔ Low shrinkage (< 0.3%)
✔ Better resistance to polyester
✔ Mixing ratio (Weight) 100:5€ 6,05 € 5,- Excl. tax
CompareElastosil FX - Softener
✔Reduce the hardness of the silicone
✔ Works perfectly with Wacker FX silicone
✔ Softens to skin-like textures
✔ Never gets oily€ 19,50 € 16,12 Excl. tax
CompareSculptaClay Red Soft
✔ A softer formulation ideal for quick shaping and smooth blending
✔ Soft, easy to knead
✔ Reusable
✔ Modeling and repairing
✔ Sulfur-free€ 83,44 € 68,96 Excl. tax
CompareElastosil FX - Fast
✔ Accelerate the curing process of Wacker FX silicone
✔ Highly concentrated platinum solution
✔ Add drop by drop
✔ Very little needed€ 146,- € 120,66 Excl. tax
CompareT40 Paste B component for condensation silicone
✔ 2% dosage
✔ Medium fast
✔ Can be used pure or mixed
✔ Low shrinkage (< 0.3%)
✔ Mainly used for Elastosil M 1470€ 25,24 € 20,86 Excl. tax
CompareT37 B component for condensation silicone
✔ 3-4% dosage
✔ dry, stretchable result
✔ Can be used neat or mixed
✔ Low shrinkage (< 0.3%)
✔ Better resistance to PU and Epoxy
✔ Mixing ratio (Weight) 100:5
✔ Long processing time€ 5,55 € 4,59 Excl. tax
CompareT35 B component for condensation silicone
✔ 5% dosage
✔ Medium fast
✔ Can be used pure or mixed
✔ Low shrinkage (< 0.3%)€ 5,88 € 4,86 Excl. tax
CompareElastosil FX - Slow
The Wacker Elastosil FX - Slow , can be used to slow the curing time of the Wacker Elastosil FX base rubber.
€ 25,95 € 21,45 Excl. tax
CompareChavant - Le Beau Touché HM (906 gram)
✔ Hard, Non-Toxic, Sulfur Free
✔ Harder than Original, Less sticky
✔ Red-Brown, Does not dry out
✔ Very smooth structure
✔ Fully meltable
✔ Working temperature up to 32 ° C (90 ° F)€ 16,99 € 14,04 Excl. tax
Compare
Scenography makes extensive use of silicone for mold making.
Acrylic resins are used to make products that look like stone, rock, wood, plastic, metal and so on. The main additional advantage of this is that our acrylic resin has a high fire rating. This is important for those projects where fire safety is important (theme parks, boats, etc.)
Props are often made of silicone (hands, fingers, arms, wounds), but also of hard resins (eyeball, nails, windows, firearms, helmets). Again in some of these ranges fire safety is of importance.
A fake bottle is quickly made with a silicone mold of a bottle and some sugar glass.
Fake broken glass is easy to imitate with low shore clear silicone.
Limbs may be faked by using a strong colorless silicone which you can color easily like the Silicone A Transparent 15.
An (eye) lens is made from clear epoxy and a gun is normally made of black colored hard PU.
Possible applications:
Props for films and movies,
fake limbs,
fake waepons,
fake guns,
fake glass,
make your own props