Scenography and props
Silicone molds and casting resins for sets and props
Polyurethane foam flexible 50 liquid
✔ Flexible foam
✔ Brownish
✔ Up to 20X volume increase
✔ Final density 50 kg/m³
✔ Mixing ratio by weight: 100:50€ 35,14 € 29,04 Excl. tax
CompareMonster Clay Grey
✔ Elastic, Non-Toxic, Sulfur Free ✔ Gray, Non-Drying ✔Oil Based Clay ✔ Reusable, Pourable ✔ Melting Temperature 57.2 ⁰C
€ 40,95 € 33,84 Excl. tax
CompareUltraCast XT Epoxyresin Crystal Clear heat resistant till 95°C
✔ Heat resistant up to 95 ° C
✔ Crystal clear UV-resistant
✔ Shore D75-80
✔ Casting thickness 0.5 mm <> 5mm
✔ 90 minutes working time
✔ Mixing ratio (Weight) 100: 50€ 29,99 € 24,79 Excl. tax
CompareAll-Round Epoxy Casting Resin
✔ Very strong and impact resistant
✔ Clear and highly UV-resistant
✔ Shore D85
✔ Castings 1mm <> 50mm
✔ 20-25 minutes working time
✔ Mixing ratio (Weight) 100: 50€ 10,50 € 8,68 Excl. tax
ComparePolyurethane Casting Resin Flexible A40
✔ Elastic, Strong, High details
✔ Amber, Fast, High pulling power
✔ Shore A 40
✔ Castings 1mm <> 60 mm.
✔ 23-27 minutes handling time
✔ Mixing ratio (Weight) 100:50€ 29,95 € 24,75 Excl. tax
CompareSilicone Condensation 35 A component
✔ Flexible, Strong, Universal
✔ White, relatively good Liquid, Bleeding
✔ Shore (A) 32-37 medium hard
✔ Stretchable > 400%
✔ Low shrinkage (< 0.3 %)€ 13,31 € 11,- Excl. tax
ComparePolyurethane Casting Resin A75 Flexible Kit
✔ Elastic, Strong, High details
✔ Beige, Fast, High tensile strength
✔ Shore A75
✔ Castings 1mm <> 30mm
✔ 15 minutes working time
✔ Mixing ratio (Weight) 100: 40€ 33,91 € 28,02 Excl. tax
CompareSilicone foam Closed Cell 3 - Spreadable
✔ Foam factor 3
✔ Spreadable
✔ Hardness Shore C 2-50
✔ Flame retardant UL94-HB
✔ Closed cell structure
✔ Mixing ratio (Weight) 100:100
✔ Processing time 3 minutes
✔ Curing time 50 min @ 60°C
✔ Density 0.352 g/cm³€ 272,92 € 225,55 Excl. tax
CompareSilicone Condensation 20 for PU and epoxy
✔ Flexible, Strong, good resistance to pu and epoxy
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 120 minutes working time
✔ Mix ratio (Weight) 100: 5€ 19,45 € 16,07 Excl. tax
CompareSilicone Condensation 20 A component
✔ Flexible, Strong, Universal
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 20 minutes working time
✔ Mix ratio (Weight) 100:5€ 18,- € 14,88 Excl. tax
ComparePolyurethane Casting Resin Flexible A60
✔ Elastic, Strong, High details
✔ Pale yellow, High tear strength
✔ Shore A 60
✔ Castings 1mm <> 60 mm.
✔ 12 minutes handling time
✔ Mixing ratio (Weight) 100:50
✔ Very high stretch€ 25,95 € 21,45 Excl. tax
CompareLSR Topcoat HE
✔ Very good adhesion to silicone substrates
✔ High elongation
✔ High reactivity
✔ Neutral odour and taste (FDA)
✔ Excellent stability and flexibility at low temperatures
✔ Suitable for compliance with the food contact regulations€ 32,50 € 26,86 Excl. tax
CompareSilicone foam Closed Cell 5
✔ Foam factor 5
✔ Hardness Shore C 7
✔ Closed cell structure
✔ Mixing ratio (Weight) 100:100
✔ Processing time 2 minutes
✔ Curing time 1 hours
✔ Density 0,175 g/cm³€ 34,- € 28,10 Excl. tax
CompareGlass fibre fabric 200 gram/m²
✔ For reinforcement in acrylic resin, polyurethane / PU, polyester and silicone
✔ Smoother, thinner and finer than A1 triaxial glass fiber cloth
✔ 200 g / m²
✔ Conducts electricity very poorly€ 13,25 € 10,95 Excl. tax
CompareSilicone Addition Pink 10
✔ Flexible, Strong
✔ Pink
✔ Shore (A) 10 (Soft)
✔ Low shrinkage (<0.1%)
✔ 40 minutes of working time
✔ Mixing ratio (Weight) 100: 100€ 36,25 € 29,96 Excl. tax
ComparePlaster bandage
This plaster is perfect for making support caps for molds from alginate or silicone
€ 9,95 € 8,22 Excl. tax
CompareSilicone Addition Clear 25
✔ Flexible, Crystal Clear
✔ Suitable for potting
✔ Shore A 25 (Medium Hard)
✔ Low shrinkage (<0.1%)
✔ 130 minutes of working time
✔ Mixing ratio (Weight) 100: 100€ 102,92 € 85,06 Excl. tax
CompareSilicone Addition Green 30 Set
✔ Flexible, Strong
✔ Green
✔ Shore (A) 30 (Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100€ 31,50 € 26,03 Excl. tax
CompareLightweight kneadable Epoxy
✔ Kneading compound, Strong, very lightweight
✔ Shore D70-75
✔ Max. thickness 40 mm
✔ 20 minutes working time
✔ Mixing ratio (Weight) 100: 100€ 19,95 € 16,49 Excl. tax
ComparePolyurethane Casting System Flexible A20
✔ Elastic, Strong, High details
✔ Amber colored, Good tensile strength
✔ Shore A 20
✔ Can be cast up to max. 60 mm thickness.
✔ 28-34 minutes processing time
✔ Mixing ratio by weight: 100:50€ 29,95 € 24,75 Excl. tax
ComparePolyurethane Crystal Clear 1200
✔ Hard, Suitable for outdoors
✔ Crystal Clear, UV Stable
✔ Shore D 75-80
✔ Castings 5mm <> 15mm
✔ 23 minutes of working time
✔ Mixing ratio (Weight) 100: 120€ 629,13 € 519,94 Excl. tax
CompareB 5 - B component for Silicone Condensation 5, 20 and 35 universal
✔ Low dosage (5%)
✔ Low shrinkage (< 0.3 %)
✔ Mixing ratio (Weight) 100:5
✔ Works on most condensation curing silicones€ 4,78 € 3,95 Excl. tax
CompareImpact-resistant polyurethane D75 / Neukadur Multicast 11
✔ Hard, Small to slightly larger castings
✔ Beige, Strong, High details, very impact resistant
✔ Shore D 75 Unfilled
✔ Castings 4mm <>30mm
✔ 5-7 minutes working time
✔ Mixing ratio (Weight) 100:100€ 15,50 € 12,81 Excl. tax
Compare
Scenography makes extensive use of silicone for mold making.
Acrylic resins are used to make products that look like stone, rock, wood, plastic, metal and so on. The main additional advantage of this is that our acrylic resin has a high fire rating. This is important for those projects where fire safety is important (theme parks, boats, etc.)
Props are often made of silicone (hands, fingers, arms, wounds), but also of hard resins (eyeball, nails, windows, firearms, helmets). Again in some of these ranges fire safety is of importance.
A fake bottle is quickly made with a silicone mold of a bottle and some sugar glass.
Fake broken glass is easy to imitate with low shore clear silicone.
Limbs may be faked by using a strong colorless silicone which you can color easily like the Silicone A Transparent 15.
An (eye) lens is made from clear epoxy and a gun is normally made of black colored hard PU.
Possible applications:
Props for films and movies,
fake limbs,
fake waepons,
fake guns,
fake glass,
make your own props