Ebalta SG 2000 L Polyurethane Casting Resin D80 Set
- Beige colored two or three-piece system
- Designed for fast, accurate castings
- Can be molded to a thickness of 80 mm, provided you use enough filler
- Filler quantity is varies depending on application, and even entirely omittable
- Can be used with up to 600% (of the total weight) filler
Description
A polyurethane casting system consisting of an A- and B component. Optional fillers can be added. This casting system is characterized in particular by its quality and ease of use. The system can be used perfectly for small to medium siezed castings, fixing molds, foundry models, replicas and prototypes.
This pu is not ideal for rotomoulding. For these procedures we advise to use the Fastcast 160.
Technical data
Without filler
- Mixing ratio: A: B = 1: 1
- Processing time: 6-8 minutes
- De-mold time at 20 ° C: 60-90 minutes
- Density: 1.1 g / cm³
- Linear shrinkage at 5 mm thickness unfilled: 0.5%
- Maximum thickness per casting: 20 mm.
- Glass temperature: 89°C
- Hardness: Shore D 70-75
With filler
- Mixing ratio: A: B: Filler = 1: 1: 3
- Processing time: 10 minutes
- De-mold time at 20 ° C: 180 minutes
- Density: 1.6 g / cm³
- Linear shrinkage at 5 mm thickness: 0.1%
- Maximum thickness per casting: 80 mm.
- Glass temperature: 89°C
- Hardness: Shore D 80-85
Processing
Pour the components together and mix well. Pour the mixed product with a constant flow into the mold, making sure no air is entrapped. Excessive heat in castings of more than 30 mm thickness can be prevented by pouring multiple successive layers (let the layer harden till it is over its exothermal peak before the next layer is poured). Hold the de-moulding until the specified time has elapsed. The thermal and mechanical properties will develop rapidly, but it is possible to improve the thermal behavior by "post curing" the cast for a few hours at a temperature of 60°C.
Important
The dehumidifiers in these products tend to settle out. We therefore recommend aggitating the components before decanting. The less filler you add, the higher the exothermic peak will be. Adding a heat conducting filler will make casting thicker layers possible. Use a mixing vessel with large surface area in order to make a maximum pot life. Adding to much filler might make the product more rigid and brittle.
Durability
The polyurethane casting system should be stored in a dry place between 6-28°C, the expiration date, which is based on storage within the specified conditions, is indicated on the packaging. Opened packages should be processed as quickly as possible to ensure product quality. Max shelf life is 6 months
Safety
The products are generally quite safe in use as long as one takes the usual precautions which is common in processing of chemical products. For example, the two components must not come into contact with food or eating utensils. Contact with the skin of one or both components must be avoided. If after cleaning skin stays sensitive contact a docter. Rinse eyes well for 15 minutes in case material gets in the eyes and contact docter. Do not ingest. For further information see Safety Data Sheet.
Other important safety information
A component Polyol
H-Code hazard statements
H319 Causes serious eye irritation.
P-Code Precautions
P264 Wash thoroughly after handling.
P280 Wear eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
B component Iso cyanate
H code hazard warnings
H332 Harmful if inhaled.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H317 May cause an allergic skin reaction.
H351 Suspected of causing cancer. Route of exposure: Inhalation.
H335 May cause respiratory irritation.
H373 May cause damage to organs through prolonged or repeated exposure. Route of exposure: Inhalation.
H304 May be fatal if swallowed and enters airways.
H410 Very toxic to aquatic life with long lasting effects.
EUH204 Contains isocyanates. May produce an allergic reaction.
P-code precautions
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P284 [In case of inadequate ventilation] wear respiratory protection.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Documentation
product information Polyurethane D80
