Polymer Clay / Plasticine
Model your creation in reusable and fusible material!
Plasticine
✔ Soft, Non-Toxic, Gray is Sulfur Free
✔ Many Colors, Does not dry out
✔ Synthetic Clay
✔ Fully meltable
✔ Melting temperature 35 ⁰C€ 8,95 € 7,40 Excl. tax
CompareMonster Clay
✔ Elastic, Non-Toxic, Sulfur-Free
✔ Red / Brown, Does not dry out
✔ Oil-based Clay
✔ Reusable, Pourable
✔ Melting temperature 57.2 ⁰C€ 40,95 € 33,84 Excl. tax
CompareMonster Clay Gray
✔ Elastic, Non-Toxic, Sulfur-Free
✔ Gray, Does not dry out
✔ Oil-based Clay
✔ Reusable, Pourable
✔ Melting temperature 57.2 ⁰C€ 40,95 € 33,84 Excl. tax
CompareChavant Clay NSP (2 lbs, 906 gr.)
✔ Hard, Non-Toxic, Sulfur-Free
✔ Different brown / gray tones, Does not dry out
✔ Wax based Clay
✔ Fully meltable
✔ Melting temperature 85⁰C€ 16,99 € 14,04 Excl. tax
CompareChavant - Le Beau Touché (906 gram)
✔ Hard, Non-Toxic, Sulfur Free
✔ Smooth, Sticky
✔ Red-Brown, Does not dry out
✔ Very smooth structure
✔ Fully meltable
✔ Working temperature room temperature€ 16,99 € 14,04 Excl. tax
CompareChavant - Monu-Melt (906 gram)
✔ Non-Toxic, Sulfur Free
✔ Meltable and brushable on CNC foam
✔ Gray, Does not dry out
✔ Very smooth structure
✔ Fully meltable, reusable
✔ Melting temperature 83-93 ° C€ 16,99 € 14,04 Excl. tax
CompareChavant - Le Beau Touché HM (906 gram)
✔ Hard, Non-Toxic, Sulfur Free
✔ Harder than Original, Less sticky
✔ Red-Brown, Does not dry out
✔ Very smooth structure
✔ Fully meltable
✔ Working temperature up to 32 ° C (90 ° F)€ 16,99 € 14,04 Excl. tax
Compare
Polymer clay is a plastic modeling compound that you can usually reuse over and over again. Very useful if you want to make a mold from an image. After making the mold, you can then reuse the polymer clay. You can then fill the mold with a casting material.
Various polymer clays are also meltable. By melting the clay and then pouring it into a mold, you can make exact copies. After the clay has hardened, you can remove it from the mold and continue processing.
Various well-known brands of polymer clay are available. The hardness, flexibility and melting temperature and the like can be different from each other. Every artist / artist often has his own preference.