Making molds with silicone, alginate and many other producs
Making molds with silicone and accessories. With silicone you can make your own molds in no time. How? Just go to the bottomofthi page for Tips and Tricks!
Release Agent Spray 0,75g/cm³
€ 16,50 € 13,64 Excl. tax
✔ Release spray for silicone
Compare
✔ Provides a good release
✔ Matting
✔ Wax-based
✔ 0.75 g / cm³Silicone Condensation 20 for Polyester
€ 19,18 € 15,85 Excl. tax
✔ Flexible, Strong, good resistance to polyester
Compare
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 120 minutes working time
✔ Mix ratio (Weight) 100:5Silicone Addition Yellow 25 Set
€ 31,50 € 26,03 Excl. tax
✔ Flexible, Strong
Compare
✔ Yellow
✔ Shore (A) 25 (Moderately Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100Bodycasting Kit - Belly Cast
€ 83,- € 68,60 Excl. tax
✔ 100% Natural, 100% Safe
Compare
✔ Everything for making a Belly Casting
✔ 1 x Manual
✔ 2 x 0.5 kg Alginate 3D-Gel extra slow
✔ 2 x Acrylic resin set 1.5 kg
✔ 1 x Acrylic resin Thixo A
✔ 1 x Triaxal fabric 1.25m2
✔ 1 X Plaster bandageSilicone Condensation 20 Starter kit
€ 31,50 € 26,03 Excl. tax
✔ Complete starter kit
Compare
✔ Contains the popular Condensation 20 silicones and more
✔ Ideal for soap molds, candle molds or concrete moldsSilicone Addition Colorless 25 (average hardness)
€ 28,95 € 23,93 Excl. tax
✔ Flexible, Strong
Compare
✔ Translucent
✔ Shore (A) 25 (average hardness)
✔ Low shrinkage (< 0.1 %)
✔30 minutes working time
✔ Mixing ratio by weight: 100:100Silicone condensation HT 60 Set - Hard
€ 216,- € 178,51 Excl. tax
✔ Very Hard, Heat resistant up to 380 ° C
Compare
✔ Red, Liquid, Non-Bleeding
✔ Shore (A) 60
✔ Low shrinkage (<0.8%)
✔ 40 minutes of working time
✔ Mixing ratio. (Weight) 100: 2Plastique Culinair® Fast
€ 47,04 € 38,88 Excl. tax
✔ Kneading compound, Strong, Blue
Compare
✔ FDA Approved
✔ Shore (A) 40 (Hard)
✔ Low shrinkage (<0.1%)
✔ 100 Seconds of working time
✔ Mixing ratio. (Weight) 100: 100Stensil ECO 60 Orange
€ 21,- € 17,36 Excl. tax
✔ Kneadable silicone, Strong, Orange
Compare
✔ Shore (A) 60
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100Condensation silicone DC 3481 Fast
€ 160,55 € 132,69 Excl. tax
✔ Flexible, Strong, Fast
Compare
✔ Beige, Good Fluid, Non-Bleeding
✔ Shore (A) 23
✔ Low shrinkage (0.2 ~ 0.4%)
✔ 30 minutes working time
✔ Mixing ratio (Weight) 100: 5Release Agent Spray 0.82 g / cm³ Achem SG-1008S,
€ 16,50 € 13,64 Excl. tax
✔ Release spray for silicone
Compare
✔ Provides a good release
✔ Matting
✔ Wax-based
✔ 0.75 g / cm³Stensil ECO 50 L Pink
€ 21,- € 17,36 Excl. tax
✔ Kneadable silicone, Strong, pink
Compare
✔ Shore (A) 50
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100- Advice from real Experts
- Ordered before 4 pm (Friday before 2 pm) is Shipped same Day
- 30 Days return period!
T47 B component for Silicone Condensation 20
€ 6,05 € 5,- Excl. tax
✔ Very fast
Compare
✔ Low dosage
✔ Can be used neat or mixed
✔ Retain properties of other hardener at low dosage
✔ Low shrinkage (< 0.3 %)
✔ 5 minutes working time
✔ Mixing ratio (Weight) 100:2Wacker Elastosil M 1470 Kneadable silicone
€ 198,- € 163,64 Excl. tax
✔ Kneading compound, Strong
Compare
✔ Pink
✔ Shore (A) 45 (Flexible Stiff)
✔ Low shrinkage (<0.2%)
✔ 10-20 minutes working time
✔ Mixing ratio (Weight) 100: 2 ~ 5B2 - B component for Silicone Condensation 20 universal
€ 6,99 € 5,78 Excl. tax
✔ Low dosage (2%)
Compare
✔ Low shrinkage (< 0.3 %)
✔ Mixing ratio (Weight) 100:2
✔ Works on most condensation curing siliconesStensil ECO 95 Blue
€ 21,- € 17,36 Excl. tax
✔ Kneadable silicone, Strong, Blue
Compare
✔ Shore (A) 95 (Hard)
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100Formwork Kit for silicone molds - Aluminium 24 x 4 cm.
€ 44,95 € 37,15 Excl. tax
✔ useful for quickly making a casing
Compare
✔ including clamps
✔ adjustable size, which means less wastage of material
✔ lasts a long time
✔ indispensable tool for the professionalFormwork Kit for silicone molds - Plastic 20 x 8 cm.
€ 42,50 € 35,12 Excl. tax
✔ useful for quickly making a casing
Compare
✔ shape into square or triangle
✔ adjustable size
✔ including clampsEpoxy support Glassfiber Cover
€ 199,- € 164,46 Excl. tax
✔ Strong, fiberglass filled
Compare
✔ Malleable
✔ Blue
✔ Support cover Thickness +/- 5 mm
✔ 20-30 minutes working time
✔ Mixing ratio (Weight) 100: 5Stensil ECO 50 Turquoise
€ 21,- € 17,36 Excl. tax
✔ Kneadable silicone, Strong, Turquoise
Compare
✔ Shore (A) 50
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100Stensil ECO 30 Sand
€ 21,- € 17,36 Excl. tax
✔ Kneadable silicone, Strong, Sand
Compare
✔ Shore (A) 30
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100Formwork Kit for silicone molds - Aluminium 49 x 8 cm.
€ 57,50 € 47,52 Excl. tax
✔ useful for quickly making a casing
Compare
✔ including clamps
✔ adjustable size, which means less wastage of material
✔ lasts a long time
✔ indispensable tool for the professionalStensil ECO 20 Orange
€ 21,- € 17,36 Excl. tax
✔ Kneadable silicone, Strong, Sand
Compare
✔ Shore (A) 20
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100ELASTOSIL® C 1200 A/B
€ 490,- € 404,96 Excl. tax
✔ Suitable for the production of reusable silicone vacuum bags.
Compare
✔ Fast curing at room temperature
✔ No chemical shrinkage
✔ Resistance to epoxy resins
✔ Resistance to polyester
✔ Two components 1:1
✔ blue / Transparent
Do you want to make a silicone or alginate mold yourself? This is of course possible with the products and the help of Siliconesandmore!
Here you will find many videos and tutorials on how to easily make a one-stop alginate mold or how to make a beautiful silicone mold from a candle or soap or whatever you like!
Due to the flexibility and the good resistance to aging due to UV radiation and temperature, molds are often made of silicone. Some silicones can withstand temperatures of up to 380 C° for short periods and are therefore suitable for metals with a low melting point.
For many applications, pourable 2-component silicone that cures at room temperature is sufficient. We really have many varieties of these, so if you can't see the forest for the trees, consult our silicone guide or give us a call!
For additional tensile strength we recommend the use of silicone compounds (silicone pastes) which normally cure at higher temperatures. This is often a little more for the professional user.
Silicone molds are often made by placing the original model in a box and pouring silicone over it. This method is quick and easy, but costs more silicone and often results in a less flexible mold. Larger images, odd shapes and delicate products are often made with a spatula mold. To do this, the silicone is thickened and spread over the statue like butter. The resulting silicone skin must of course retain its shape. A support cap is therefore made of epoxy or acrylic resin, for example.
Molds are used for many things. Be it the production of statues in concrete, cement, polyurethane, polyester, etc. or even making sweets. These molds are often made of silicone because of its flexibility and good resistance to aging by UV and temprature. Some silicone can withstand temperatures of 380 ° C for short periods of time and are therefore suitable for metals with low melting point like some tin compounds.
Silicones come in many different types, from one component silicone sealant to two or more components liquid silicone which harden at room temperature. In industrial applications one often uses silicone compounds which are processed with presses or injection machines at higher temperature.
For many applications, a two component room temeprature hardening silicone will do the trick, but for added strength, we recommend the use of silicone compounds (silicone paste) which usually harden at higher temperatures.
Moulds are often made via the casting process in which the original is placed in a container and silicone is poured over it. With more demanding or bigger models however it is easier to make the silicone paste like and brush it against the model. The silicone skin thus obtained has got a lot of detail but no dimensional stability. For this you would need a support hull made e.g. form epoxy or Acrylic resin.