masks
Create flexible and hard plastic masks
Silicone Wound
✔ Flexible, Very Soft, Skin Friendly
✔ Light skin color
✔ Shore (A) 5 (soft)
✔ Low shrinkage (<0.1%)
✔ 2 minutes working time
✔ Mixing ratio (weight) 100: 100€ 24,95 € 20,62 Excl. tax
CompareSilicone foam Open Cell 6
✔ Foam factor 6
✔ Hardness Shore C 4
✔ Open cell structure
✔ Mixing ratio (Weight) 100:100
✔ Working time 2 minutes
✔ Curing time 2 hours
✔ Density 0.193 g/cm³€ 34,08 € 28,17 Excl. tax
CompareEd & Alanna H2.0 - Premium Life Size Armatures
Water-fillable sculpture busts from The Monster Makers. Create your sculpture. Fill with warm water and your sculpture will come off easily. These Sculpture Busts are very strong and will therefore last for years.
€ 124,95 € 103,26 Excl. tax
CompareMonster Clay Green
✔ Elastic, Non-Toxic, Sulfur-Free
✔ Green, Does not dry out
✔ Oil-based Clay
✔ Reusable, Pourable
✔ Melting temperature 57.2 ⁰C€ 40,95 € 33,84 Excl. tax
CompareZhermack SFX 00-20
✔ Highly Flexible, Skin Safe
✔ Color Translucent
✔ Shore (A) 00-20 (Very Very Soft)
✔ Low Shrinkage (< 0.1 %)
✔ Processing Time (@ 23 °C) 25 min.
✔ Curing time (@ 23 °C) 70 minutes
✔ Viscosity (cP) 5,200
✔ Mixing ratio: 100:100€ 452,- € 373,55 Excl. tax
CompareSilicone foam Open Cell 7 - Spreadable
✔ Foam factor 7
✔ Spreadable
✔ Hardness Shore C 5-10
✔ Flame retardant UL94-V0
✔ Open cell structure
✔ Mixing ratio (Weight) 100:100
✔ Working time 2 minutes
✔ Curing time 70 min @ 60°C
✔ Density 0.162 g/cm³€ 272,92 € 225,55 Excl. tax
CompareEpoxy support Glassfiber Cover
✔ Strong, fiberglass filled
✔ Malleable
✔ Blue
✔ Support cover Thickness +/- 5 mm
✔ 20-30 minutes working time
✔ Mixing ratio (Weight) 100: 5€ 46,05 € 38,06 Excl. tax
CompareZhermack SFX 00-30
✔ Highly Flexible, Skin Safe
✔ Color Translucent
✔ Shore (A) 00-30 (Very Very Soft)
✔ Low Shrinkage (< 0.1 %)
✔ Processing Time (@ 23 °C) 25 min.
✔ Curing time (@ 23 °C) 70 minutes
✔ Viscosity (cP) 6.000
✔ Mixing ratio: 100:100€ 452,- € 373,55 Excl. tax
CompareSilicone foam Closed Cell 3
✔ Foam factor 3
✔ Hardness Shore C 2-50
✔ Closed cell structure
✔ Mixing ratio (Weight) 100:100
✔ Processing time 3 minutes
✔ Curing time 50 minutes
✔ Density 0.352 g/cm³€ 272,92 € 225,55 Excl. tax
CompareEpoxy Support Cap EPOPAST 402/400
✔ Low odor
✔ Low density
✔ Easy processing
✔ Temperature resistant 70°C€ 338,- € 279,34 Excl. tax
CompareElastosil FX - Softener
✔Reduce the hardness of the silicone
✔ Works perfectly with Wacker FX silicone
✔ Softens to skin-like textures
✔ Never gets oily€ 19,50 € 16,12 Excl. tax
CompareChavant - Monu-Melt (906 gram)
✔ Non-Toxic, Sulfur Free
✔ Meltable and brushable on CNC foam
✔ Gray, Does not dry out
✔ Very smooth structure
✔ Fully meltable, reusable
✔ Melting temperature 83-93 ° C€ 16,99 € 14,04 Excl. tax
CompareChavant - Le Beau Touché HM (906 gram)
✔ Hard, Non-Toxic, Sulfur Free
✔ Harder than Original, Less sticky
✔ Red-Brown, Does not dry out
✔ Very smooth structure
✔ Fully meltable
✔ Working temperature up to 32 ° C (90 ° F)€ 16,99 € 14,04 Excl. tax
CompareElastosil FX Thixo
The Wacker FX Thixo is a thickener especially for the Wacker FX silicone. This makes the silicone thicker to pasty.
€ 25,95 € 21,45 Excl. tax
CompareElastosil FX - Slow
The Wacker Elastosil FX - Slow , can be used to slow the curing time of the Wacker Elastosil FX base rubber.
€ 25,95 € 21,45 Excl. tax
CompareElastosil FX - Fast
✔ Accelerate the curing process of Wacker FX silicone
✔ Highly concentrated platinum solution
✔ Add drop by drop
✔ Very little needed€ 146,- € 120,66 Excl. tax
Compare
Making a lifelike mask yourself is possible with silicone! These masks will feel and move like real skin and can be shaped in many ways. There are many YouTube movies on how to make silicone masks.
Making a realistic mask requires practice!
Because silicone is hard to paint the base color is often added to the silicone when mixing. Further coloring is done in very thin layers by using the same silicone in the desired colors. Often, the silicone is dissolved in toluene or thinnner to spray it with an air brush.
Note that addition curing silicone does not adhere well. It works best when you work on a still tacky silicone layer
Of course you can also make a hard plastic mask of poly urethane. Polyurethan is very easy to finish and rework.