Collection
Conical aluminium can, 25 liter content
€ 24,- € 19,83 Excl. tax
Conical can for 25 litres. Made out of sheet steel . Comes with lid, sealing ring and lock pin.
CompareSulzer Mixpac™ Cartridges 1500 ml.
€ 14,52 € 12,- Excl. tax
✔ Cartridges for Sulzer Mixpac™ DM 1500-01 Dispenser - 2K mixing system
Compare
✔ Consists of a cartridge with a pre-assembled cap and two separate pistons
✔ Made of Polypropylene plasticTransparent colourant for polyurethane & epoxy resin
€ 4,95 € 4,09 Excl. tax
Transparent colourant for polyurethane or epoxy resin
Compare10 x Tongue spatula
€ 0,50 € 0,41 Excl. tax
- Hygienic manufactured
Compare
- Splinterproof2-Component Cartridges 900 ml. ± 200 pieces
€ 300,- € 247,93 Excl. tax
Volume: 900 ml
Compare
Material: PP
Design: piston superior
Length: 65,1:46,0 mm
Ø A-tube : Ø B-tube: 216,5 mm
Mixing ratio: 2:13M 4251+ Gas/Vapour and particulate respirator
€ 39,95 € 33,02 Excl. tax
✔ 3M 4251+ Gas/Vapour and particulate respirator
Compare3M 6055 Gas filter A2 set of 2 pieces
€ 22,30 € 18,43 Excl. tax
✔ Protection against organic vapors and gases (with boiling point above 65 ° C)
Compare
✔ Standard: EN 143
✔ Packed per 2 pieces
✔ Compatible with 3M 6000 and 7000 series half and full face masks
✔ A precise and secure lock
✔ Lightweight3M Half Face Mask 6502QL MEDIUM
€ 48,- € 39,67 Excl. tax
Reusable by replacing filters, protection against organic vapors and gases
Compare5 ltr conical tin can blank/blank UN
€ 12,75 € 10,54 Excl. tax
Conical can for 5 litres. Comes with lid, sealing ring and lock pin.
CompareA1 Accelerator
€ 7,25 € 5,99 Excl. tax
A1 Accelerator can be used to reduce the processing time of the A1 Acrylic Resin. Always add the A1 Accelerator to the A1 Liquid. Limit the amount of A1 Accelerator used to a maximum of 1% of the total weight. A1 Accelerator can also be used to corre
CompareA1 Acrylic Resin
€ 15,95 € 13,18 Excl. tax
A1 Acrylic Resin is strong, eco-friendly and versatile for casting and laminating. Easy to mix, shrink-free and fire-resistant. Suitable for indoor and outdoor use when used with a sealer. Perfect for art, molds and sculptures!
CompareA1 Acrylic resin Retarder
€ 7,25 € 5,99 Excl. tax
✔ Retardant for the A1 acrylic resin
Compare
✔ Extend the processing time of acrylic resin to more than 2 hours!
✔ Maximum 1% addition to A1 acrylic resin liquid- Pay later with Klarna
- 30 Days return period!
- Advice from real Experts
A1 ATP Powder
€ 9,98 € 8,25 Excl. tax
A1 ATP Powder is a volume thickener. This allows the A1 to be thickened to filling thickness.
CompareA1 Diluent
€ 4,96 € 4,10 Excl. tax
A1 Diluent reduces the viscosity of A1. This allows for casting of complex products or adding more filler. It can affect the processing time. Use a maximum of 5% relative to the total weight.
CompareA1 Sealer Plus - Gloss
€ 11,50 € 9,50 Excl. tax
✔ 1 component
Compare
✔ solvent free
✔ water-based
✔ quick drying
✔ easy to apply
✔ good UV resistance
✔ excellent adhesion
✔ protection against dirt absorption
✔ good protection against moistureA1 Sealer Plus - Matt
€ 11,50 € 9,50 Excl. tax
✔ 1 component
Compare
✔ solvent free
✔ water-based
✔ quick drying
✔ easy to apply
✔ good UV resistance
✔ excellent adhesion
✔ protection against dirt absorption
✔ good protection against moistureA1 Sealer Plus - Satin
€ 11,50 € 9,50 Excl. tax
✔ 1 component
Compare
✔ solvent free
✔ water-based
✔ quick drying
✔ easy to apply
✔ good UV resistance
✔ excellent adhesion
✔ protection against dirt absorption
✔ good protection against moistureA1 Thixotropic A
€ 7,50 € 6,20 Excl. tax
A1 Thix A is an additive to thicken the product into a gel.
CompareA1 Triaxial glass fibre fabric
€ 6,50 € 5,37 Excl. tax
✔ For reinforcement in acrylic resin, silicone or polyester.
Compare
✔ Easier to drape than a regular fabric.
✔ 160 g / m²Aceton
€ 3,75 € 3,10 Excl. tax
Universal for cleaning and disinfection. Suitable for polyester & epoxy.
CompareAcrylic resin color paste
€ 6,95 € 5,74 Excl. tax
Color your acrylic resin cast thoroughly with beautiful vibrant colors.
CompareAdbond Advantage
€ 146,45 € 121,03 Excl. tax
Remasol Adbond Advantage has an increased adhesion to wax surfaces making it an ideal primary binder. A ready to use solution, optimised for the best performance.
CompareAlginat 3D-Gel - Slow - 0.5 kg
€ 11,50 € 9,50 Excl. tax
✔ 100% Natural, 100% Safe
Compare
✔ Discolored from Purple to Blue
✔ Suitable for bust, belly print, face
✔ Relatively strong after gelling
✔ 9 minutes de-mold time at 21 ° C Water
✔ Mixing ratio (Weight) [gel: water] 1: 4Alginate 3D Gel - 0.5 Kg.
€ 11,50 € 9,50 Excl. tax
Make lifelike 3D molds quickly and easily with Alginate 3D Gel! In just 5 minutes, you’ll have a detailed mold ready for casting hands, feet, faces or more. Ideal for lifecasting, DIY art, or one-of-a-kind keepsakes. Skin-safe, fast, and easy to us
Compare
