Jewellery
Molds for jewelery or materials such as synthetic resins for casting jewelry.
Silicone Condensation 20 universal Set
€ 14,48 € 11,97 Excl. tax
✔ Flexible, Strong, Universal
Compare
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 20 minutes working time
✔ Mix ratio (Weight) 100:5Porcelain gypsum plaster
€ 5,95 € 4,92 Excl. tax
✔ Fine ceramic powder with high density
Compare
✔ White, paintable
✔ Exceptionally hard
✔ Powder: water = 4: 1
✔ Working time: 6 minutes
✔ De-mold time: 30 minutesApoxie Sculpt
€ 14,75 € 12,19 Excl. tax
✔ Kneading mass, water resistant ✔ Smooth consistency ✔ Many different colours ✔ 0% shrinkage/breakage ✔ 2-3 hours working time ✔ Mixing ratio (weight) 100:100
CompareEbalta SG 2000 L Polyurethane Casting Resin D80 Set
€ 27,18 € 22,46 Excl. tax
Ebalta SG 2000 L is a fast-curing polyurethane casting resin for strong, detailed castings up to 80 mm. Ideal for molds, prototypes, and models. Use with or without filler. Easy 1:1 mix ratio, high Shore D hardness, and excellent heat resistance.
ComparePolyurethane / Epoxy dye
€ 4,95 € 4,09 Excl. tax
✔ Gives a color to polyurethane and epoxy
Compare
✔ Choice of many colors
✔ Very concentrated, colors stronglyPolyurethane Casting Resin D70 Fast
€ 27,18 € 22,46 Excl. tax
Fast-curing, high-strength polyurethane casting resin for precise molds, models, and prototypes. Cures in just 15 minutes, low shrinkage, excellent detail. Ideal for professionals, engineers, and makers.
CompareStensil ECO 70 Blue
€ 21,- € 17,36 Excl. tax
✔ Kneadable silicone, Strong, Blue
Compare
✔ Shore (A) 70
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100Silicone Addition Colorless 5 (very soft)
€ 28,95 € 23,93 Excl. tax
✔ Flexible, Strong
Compare
✔ Translucent
✔ Shore (A) 5 (Very soft)
✔ Low shrinkage (<0.1%)
✔ 30 minutes working time
✔ Mixing ratio (Weight) 100: 100Apoxie Clay
€ 17,75 € 14,67 Excl. tax
✔ Kneading compound, water resistant
Compare
✔ Clay-like texture / Grainy
✔ Colors: white or native
✔ 0% shrinkage / breakage
✔ 1-3 hours working time
✔ Mixing ratio (volume) = 100: 100UltraCast XT Epoxyresin Crystal Clear heat resistant till 95°C
€ 29,99 € 24,79 Excl. tax
✔ Heat resistant up to 95 ° C
Compare
✔ Crystal clear UV-resistant
✔ Shore D75-80
✔ Casting thickness 0.5 mm <> 5mm
✔ 90 minutes working time
✔ Mixing ratio (Weight) 100: 50All-Round Epoxy Casting Resin
€ 10,50 € 8,68 Excl. tax
✔ Very strong and impact resistant
Compare
✔ Clear and highly UV-resistant
✔ Shore D85
✔ Castings 1mm <> 50mm
✔ 20-25 minutes working time
✔ Mixing ratio (Weight) 100: 50Silicone Condensation 20 A component
€ 18,- € 14,88 Excl. tax
✔ Flexible, Strong, Universal
Compare
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 20 minutes working time
✔ Mix ratio (Weight) 100:5- Pay later with Klarna
- 30 Days return period!
- Advice from real Experts
Silicone Addition Colorless 25 (average hardness)
€ 28,95 € 23,93 Excl. tax
✔ Flexible, Strong
Compare
✔ Translucent
✔ Shore (A) 25 (average hardness)
✔ Low shrinkage (< 0.1 %)
✔30 minutes working time
✔ Mixing ratio by weight: 100:100Silicone Condensation 20 for PU and epoxy
€ 19,45 € 16,07 Excl. tax
✔ Flexible, Strong, good resistance to pu and epoxy
Compare
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 120 minutes working time
✔ Mix ratio (Weight) 100: 5Silicone Addition Pink 10
€ 36,25 € 29,96 Excl. tax
✔ Flexible, Strong
Compare
✔ Pink
✔ Shore (A) 10 (Soft)
✔ Low shrinkage (<0.1%)
✔ 40 minutes of working time
✔ Mixing ratio (Weight) 100: 100Casting wax for Jewellery
€ 21,59 € 17,84 Excl. tax
✔ Small jewelry, lots of detail
Compare
✔ Blue, Pastilles, slightly flexible
✔ Low shrinkage
✔ Pour point 66 ° C
✔ Melting point 75 ° C
✔ Ash content after combustion <0.03%Plaster bandage
€ 9,95 € 8,22 Excl. tax
This plaster is perfect for making support caps for molds from alginate or silicone
CompareSilicone Condensation 5 A component - Soft
€ 13,31 € 11,- Excl. tax
✔ Flexible, Strong, Universal
Compare
✔ White, Good Flow, Bleeding
✔ Shore (A) 3-7 soft
✔ Stretchable > 400%
✔ Low shrinkage (< 0.3 %)Microcrystalline wax LMP slab
€ 4.116,42 € 3.402,- Excl. tax
✔ Basic wax, Mixed wax, Shell wax
Compare
✔ Natural, Flexible, Plate, Soft
✔ A lot of shrinkage
✔ Pour point 64 ° C
✔ Melting point 68 ° C
✔ Ash content after combustion <0.03%B 5 - B component for Silicone Condensation 5, 20 and 35 universal
€ 4,78 € 3,95 Excl. tax
✔ Low dosage (5%)
Compare
✔ Low shrinkage (< 0.3 %)
✔ Mixing ratio (Weight) 100:5
✔ Works on most condensation curing siliconesSilicone Condensation 35 A component
€ 13,31 € 11,- Excl. tax
✔ Flexible, Strong, Universal
Compare
✔ White, relatively good Liquid, Bleeding
✔ Shore (A) 32-37 medium hard
✔ Stretchable > 400%
✔ Low shrinkage (< 0.3 %)Silicone Addition Colorless 50 (hard)
€ 28,95 € 23,93 Excl. tax
✔ Flexible, Strong
Compare
✔ Translucent
✔ Shore (A) 50 (Hard)
✔ Low shrinkage (< 0.1 %)
✔30 minutes working time
✔ Mixing ratio by weight: 100:100Silicone Addition Green 30 Set
€ 31,50 € 26,03 Excl. tax
✔ Flexible, Strong
Compare
✔ Green
✔ Shore (A) 30 (Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100Impact-resistant polyurethane D75 / Neukadur Multicast 11
€ 15,50 € 12,81 Excl. tax
✔ Hard, Small to slightly larger castings
Compare
✔ Beige, Strong, High details, very impact resistant
✔ Shore D 75 Unfilled
✔ Castings 4mm <>30mm
✔ 5-7 minutes working time
✔ Mixing ratio (Weight) 100:100
Small jewelery of silver and gold etc are traditionally made using the lost wax method. For this we have beautiful wash our range. Of course we can also supply the gypsum used in cuvettes.
Jewellery can of course also be made of transparent materials, or even flexible. Our clear resins are nice to work and are suitable to pour something in or just to create a nice shape. Use for example the crystal clear epoxy or PU casting systems.