Make your own model scale moulds and cast plasti or even tin!
For miniature, silicone moulds with very little shrinkage and high detail are very important. Given the size and often delicate form, it is also wise to take a silicone that is quite soft and flexible.
Silicone Addition Clear 5 (very soft)
€ 66,50 € 54,96 Excl. tax
✔ Flexible, Crystal clear
Compare
✔ Suitable for potting
✔ Shore (A) 5 (Very Soft)
✔ Low shrinkage (<0.1%)
✔ 30 minutes working time
✔ Mixing ratio (Weight) 100: 100Silicone Addition Clear 25
€ 102,92 € 85,06 Excl. tax
✔ Flexible, Crystal Clear
Compare
✔ Suitable for potting
✔ Shore A 25 (Medium Hard)
✔ Low shrinkage (<0.1%)
✔ 130 minutes of working time
✔ Mixing ratio (Weight) 100: 100Silicone Addition Yellow 25 Set
€ 31,50 € 26,03 Excl. tax
✔ Flexible, Strong
Compare
✔ Yellow
✔ Shore (A) 25 (Moderately Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100Cenusil M 825
€ 11.254,- € 9.300,83 Excl. tax
CENUSIL® M 825 A/B is especially suitable for all molds of models with extensive undercuts.
CompareSilicone Condensation 20 for Polyester
€ 19,18 € 15,85 Excl. tax
✔ Flexible, Strong, good resistance to polyester
Compare
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 120 minutes working time
✔ Mix ratio (Weight) 100:5Apoxie Super White
€ 13,70 € 11,32 Excl. tax
✔ Kneading compound, water resistant
Compare
✔ Very fine grain
✔ Very white
✔ 0% shrinkage / breakage
✔ 1 hour working time
✔ Mixing ratio (Weight) 100: 100T21 B component for condensation silicone
€ 6,05 € 5,- Excl. tax
✔ 5% dosage
Compare
✔ dry, stretchable result
✔ Can be used neat or mixed
✔ Low shrinkage (< 0.3%)
✔ Better resistance to PU and EpoxyT47 B component for condensation silicone
€ 6,05 € 5,- Excl. tax
✔ Very fast
Compare
✔ Low dosage
✔ Can be used neat or mixed
✔ Retain properties of other hardener at low dosage
✔ Low shrinkage (< 0.3 %)
✔ 5 minutes working time
✔ Mixing ratio (Weight) 100:2A1 Iron powder
€ 43,33 € 35,81 Excl. tax
Various metal powders, such as iron, bronze or copper powder, can be added to, for example, A1 acrylic resin.
CompareWacker Elastosil M 1470 Kneadable silicone
€ 255,75 € 211,36 Excl. tax
✔ Kneading compound, Strong
Compare
✔ Pink
✔ Shore (A) 45 (Flexible Stiff)
✔ Low shrinkage (<0.2%)
✔ 10-20 minutes working time
✔ Mixing ratio (Weight) 100: 2 ~ 5ELASTOSIL® C 1200 A/B
€ 453,66 € 374,93 Excl. tax
✔ Suitable for the production of reusable silicone vacuum bags.
Compare
✔ Fast curing at room temperature
✔ No chemical shrinkage
✔ Resistance to epoxy resins
✔ Resistance to polyester
✔ Two components 1:1
✔ blue / TransparentStensil ECO 50 Yellow
€ 21,- € 17,36 Excl. tax
✔ Kneadable silicone, Strong, Yellow
Compare
✔ Shore (A) 50
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100- Pay later with Klarna
- 30 Days return period!
- Advice from real Experts
Stensil ECO 60 Orange
€ 21,- € 17,36 Excl. tax
✔ Kneadable silicone, Strong, Orange
Compare
✔ Shore (A) 60
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100Wacker Elastosil RT 480 Spreadable silicone
€ 48,95 € 40,45 Excl. tax
✔ Pasty (250,000 mPa s)
Compare
✔ Strong
✔ Light gray
✔ Shore (A) 55 (Flexible Stiff)
✔ Low shrinkage (0.25 to 0.5%)
✔ 20 or 120 minutes working time
✔ Mixing ver. (Weight)100:3 or 4Stensil ECO 50 L Pink
€ 21,- € 17,36 Excl. tax
✔ Kneadable silicone, Strong, pink
Compare
✔ Shore (A) 50
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100T51 B component for condensatie silicone
€ 6,05 € 5,- Excl. tax
✔ 5% dosage
Compare
✔ dry, stretchy result
✔ Can be used neat or mixed
✔ Low shrinkage (< 0.3%)
✔ Better resistance to polyester
✔ Mixing ratio (Weight) 100:5Stensil ECO 50 Turquoise
€ 21,- € 17,36 Excl. tax
✔ Kneadable silicone, Strong, Turquoise
Compare
✔ Shore (A) 50
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100T40 B component for condensatie silicone
€ 5,87 € 4,85 Excl. tax
✔ 2-3% dosage
Compare
✔ Medium fast
✔ Can be used pure or mixed
✔ Low shrinkage (< 0.3%)T35 B component for condensation silicone
€ 5,88 € 4,86 Excl. tax
✔ 5% dosage
Compare
✔ Medium fast
✔ Can be used pure or mixed
✔ Low shrinkage (< 0.3%)T37 B component for condensation silicone
€ 5,55 € 4,59 Excl. tax
✔ 3-4% dosage
Compare
✔ dry, stretchable result
✔ Can be used neat or mixed
✔ Low shrinkage (< 0.3%)
✔ Better resistance to PU and Epoxy
✔ Mixing ratio (Weight) 100:5
✔ Long processing timeChavant - Le Beau Touché HM (906 gram)
€ 16,99 € 14,04 Excl. tax
✔ Hard, Non-Toxic, Sulfur Free
Compare
✔ Harder than Original, Less sticky
✔ Red-Brown, Does not dry out
✔ Very smooth structure
✔ Fully meltable
✔ Working temperature up to 32 ° C (90 ° F)T40 Paste B component for condensation silicone
€ 25,24 € 20,86 Excl. tax
✔ 2% dosage
Compare
✔ Medium fast
✔ Can be used pure or mixed
✔ Low shrinkage (< 0.3%)
✔ Mainly used for Elastosil M 1470
Miniatures are a wonderful way to make fantasy come to live or to showcase historical events.
Usually, silicone molds are used to cast plastics, gips or even tin into. You can also make a copy of your miniature and change it partly to quickly create multiple variations.
Because the dimensional accuracy is important, we recommend the use of addition curing silicones without adding oils or other materials that will (over time) escape from the silicone mould.
Some silicones are able to withstand high temperatures for a short while (up to 380 o) This makes it possible to cast low melting point alloys like tin into them and create your own tin miniature.
However most often miniatures are made from polyurehtane. This is a handy plastic material that is easy to process. After it has cured this material is easy to process further(grinding, drilling, polishing, etc.)