Make your own model scale moulds and cast plasti or even tin!
For miniature, silicone moulds with very little shrinkage and high detail are very important. Given the size and often delicate form, it is also wise to take a silicone that is quite soft and flexible.
All-Round Epoxy Casting Resin
€ 10,50 € 8,68 Excl. tax
✔ Very strong and impact resistant
Compare
✔ Clear and highly UV-resistant
✔ Shore D85
✔ Castings 1mm <> 50mm
✔ 20-25 minutes working time
✔ Mixing ratio (Weight) 100: 50Silicone Addition Colorless 50 (hard)
€ 28,95 € 23,93 Excl. tax
✔ Flexible, Strong
Compare
✔ Translucent
✔ Shore (A) 50 (Hard)
✔ Low shrinkage (< 0.1 %)
✔30 minutes working time
✔ Mixing ratio by weight: 100:100Syringe
€ 0,50 € 0,41 Excl. tax
✔ For vacuuming and dosing liquids
Compare
✔ With time indication
✔ Without needleSilicone Addition Pink 10
€ 36,25 € 29,96 Excl. tax
✔ Flexible, Strong
Compare
✔ Pink
✔ Shore (A) 10 (Soft)
✔ Low shrinkage (<0.1%)
✔ 40 minutes of working time
✔ Mixing ratio (Weight) 100: 100Polyurethane Casting Resin D70 Fast
€ 27,18 € 22,46 Excl. tax
✔ Perfect for molds & models – High level of detail ✔ Easy to process – Easy to mix & pour ✔ Fast curing – De-moulding time from 15 min ✔ With or without filler – Up to 40 mm thick ✔ Mixing ratio – A:B = 1:1 / A:B:V = 1:1:3
ComparePolyvinyl Alcohol Release agent (PVA)
€ 4,95 € 4,09 Excl. tax
✔ Provides a protective layer against poisoning from addition-hardening silicone
Compare
✔ Easy to process
✔ Soluble in waterPT Flex 97
€ 38,50 € 31,82 Excl. tax
✔ Elastic, Strong, High details
Compare
✔ Yellow/Amber colored
✔ Shore A97
✔ Castings 1mm <>20mm
✔ 4 minutes working time
✔ Mixing ratio (Weight)100:100Silicone Condensation DC 3481 R
€ 33,50 € 27,69 Excl. tax
✔ Flexible, Strong, High PU and polyester resin resistance
Compare
✔ Beige, Good Fluid, Non-Bleeding
✔ Shore (A) 18 ~ 21
✔ Low shrinkage (0.2 ~ 0.4%)
✔90 ~ 120 minutes working time
✔ Mixing ratio (Weight) 100: 5Wax Modeling Wax Medium Hard
€ 19,95 € 16,49 Excl. tax
✔ Moderately Hard Modeling Wax, Not grainy
Compare
✔ Copper colored, Block
✔ No shrinkage
✔ Pour point 61 ° C
✔ Melting point 65 ° C
✔ Ash content after combustion <0.03%B 5 - B component for Silicone Condensation 5, 20 and 35 universal
€ 4,78 € 3,95 Excl. tax
✔ Low dosage (5%)
Compare
✔ Low shrinkage (< 0.3 %)
✔ Mixing ratio (Weight) 100:5
✔ Works on most condensation curing siliconesSilicone Addition Green 30 Set
€ 31,50 € 26,03 Excl. tax
✔ Flexible, Strong
Compare
✔ Green
✔ Shore (A) 30 (Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100Silicone condensation HT 60 Set - Hard
€ 45,95 € 37,98 Excl. tax
✔ Very Hard, Heat resistant up to 380 ° C
Compare
✔ Red, Liquid, Non-Bleeding
✔ Shore (A) 60
✔ Low shrinkage (<0.8%)
✔ 40 minutes of working time
✔ Mixing ratio. (Weight) 100: 2- Pay later with Klarna
- 30 Days return period!
- Advice from real Experts
Impact-resistant polyurethane D75 / Neukadur Multicast 11
€ 15,50 € 12,81 Excl. tax
✔ Hard, Small to slightly larger castings
Compare
✔ Beige, Strong, High details, very impact resistant
✔ Shore D 75 Unfilled
✔ Castings 4mm <>30mm
✔ 5-7 minutes working time
✔ Mixing ratio (Weight) 100:100Silicone Condensation 5 A component - Soft
€ 13,31 € 11,- Excl. tax
✔ Flexible, Strong, Universal
Compare
✔ White, Good Flow, Bleeding
✔ Shore (A) 3-7 soft
✔ Stretchable > 400%
✔ Low shrinkage (< 0.3 %)totalCAST Clear coating and casting jewelry
€ 42,95 € 35,50 Excl. tax
✔ Coating, sealing, Good liquid
Compare
✔ Crystal clear, UV resistant
✔ Shore D70-75
✔ Casting thickness 1 mm <> 20 mm
✔ 10-15 @23°C minutes working time
✔ Mixing ratio (Weight) 100: 100Apoxie Super White
€ 13,70 € 11,32 Excl. tax
✔ Kneading compound, water resistant
Compare
✔ Very fine grain
✔ Very white
✔ 0% shrinkage / breakage
✔ 1 hour working time
✔ Mixing ratio (Weight) 100: 100Condensation silicone DC 3481 Fast
€ 160,55 € 132,69 Excl. tax
✔ Flexible, Strong, Fast
Compare
✔ Beige, Good Fluid, Non-Bleeding
✔ Shore (A) 23
✔ Low shrinkage (0.2 ~ 0.4%)
✔ 30 minutes working time
✔ Mixing ratio (Weight) 100: 5Silicone Condensation 20 for Polyester
€ 19,18 € 15,85 Excl. tax
✔ Flexible, Strong, good resistance to polyester
Compare
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 120 minutes working time
✔ Mix ratio (Weight) 100:5Silicone Condensation 20 Starter kit
€ 31,50 € 26,03 Excl. tax
✔ Complete starter kit
Compare
✔ Contains the popular Condensation 20 silicones and more
✔ Ideal for soap molds, candle molds or concrete moldsStensil ECO 95 Blue
€ 21,- € 17,36 Excl. tax
✔ Kneadable silicone, Strong, Blue
Compare
✔ Shore (A) 95 (Hard)
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100Mini Polishing machine - BTC Line Blue 12V
€ 84,50 € 69,83 Excl. tax
✔ Compact polisher
Compare
✔ Includes bag, battery and discs
✔ Very useful for small surfaces and complex shapesSilicone Addition Clear 25
€ 102,92 € 85,06 Excl. tax
✔ Flexible, Crystal Clear
Compare
✔ Suitable for potting
✔ Shore A 25 (Medium Hard)
✔ Low shrinkage (<0.1%)
✔ 130 minutes of working time
✔ Mixing ratio (Weight) 100: 100Stensil ECO 50 Yellow
€ 21,- € 17,36 Excl. tax
✔ Kneadable silicone, Strong, Yellow
Compare
✔ Shore (A) 50
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100Silicone Condensation 35 A component
€ 13,31 € 11,- Excl. tax
✔ Flexible, Strong, Universal
Compare
✔ White, relatively good Liquid, Bleeding
✔ Shore (A) 32-37 medium hard
✔ Stretchable > 400%
✔ Low shrinkage (< 0.3 %)
Miniatures are a wonderful way to make fantasy come to live or to showcase historical events.
Usually, silicone molds are used to cast plastics, gips or even tin into. You can also make a copy of your miniature and change it partly to quickly create multiple variations.
Because the dimensional accuracy is important, we recommend the use of addition curing silicones without adding oils or other materials that will (over time) escape from the silicone mould.
Some silicones are able to withstand high temperatures for a short while (up to 380 o) This makes it possible to cast low melting point alloys like tin into them and create your own tin miniature.
However most often miniatures are made from polyurehtane. This is a handy plastic material that is easy to process. After it has cured this material is easy to process further(grinding, drilling, polishing, etc.)