Make your own model scale moulds and cast plasti or even tin!
For miniature, silicone moulds with very little shrinkage and high detail are very important. Given the size and often delicate form, it is also wise to take a silicone that is quite soft and flexible.
Silicone Condensation 35 A component
✔ Flexible, Strong, Universal
✔ White, relatively good Liquid, Bleeding
✔ Shore (A) 32-37 medium hard
✔ Stretchable > 400%
✔ Low shrinkage (< 0.3 %)€ 13,31 € 11,- Excl. tax
CompareSilicone Condensation 20 A component
✔ Flexible, Strong, Universal
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 20 minutes working time
✔ Mix ratio (Weight) 100:5€ 18,- € 14,88 Excl. tax
CompareSilicone Addition Colorless 25 (average hardness)
✔ Flexible, Strong
✔ Translucent
✔ Shore (A) 25 (average hardness)
✔ Low shrinkage (< 0.1 %)
✔30 minutes working time
✔ Mixing ratio by weight: 100:100€ 28,95 € 23,93 Excl. tax
CompareUltraCast XT Epoxyresin Crystal Clear heat resistant till 95°C
✔ Heat resistant up to 95 ° C
✔ Crystal clear UV-resistant
✔ Shore D75-80
✔ Casting thickness 0.5 mm <> 5mm
✔ 90 minutes working time
✔ Mixing ratio (Weight) 100: 50€ 29,99 € 24,79 Excl. tax
CompareSilicone Condensation DC 3481 R
✔ Flexible, Strong, High PU and polyester resin resistance
✔ Beige, Good Fluid, Non-Bleeding
✔ Shore (A) 18 ~ 21
✔ Low shrinkage (0.2 ~ 0.4%)
✔90 ~ 120 minutes working time
✔ Mixing ratio (Weight) 100: 5€ 33,50 € 27,69 Excl. tax
ComparePlaster bandage
This plaster is perfect for making support caps for molds from alginate or silicone
€ 9,95 € 8,22 Excl. tax
CompareMini Polishing machine - BTC Line Blue 12V
✔ Compact polisher
✔ Includes bag, battery and discs
✔ Very useful for small surfaces and complex shapes€ 84,50 € 69,83 Excl. tax
CompareImpact-resistant polyurethane D75 / Neukadur Multicast 11
✔ Hard, Small to slightly larger castings
✔ Beige, Strong, High details, very impact resistant
✔ Shore D 75 Unfilled
✔ Castings 4mm <>30mm
✔ 5-7 minutes working time
✔ Mixing ratio (Weight) 100:100€ 15,50 € 12,81 Excl. tax
ComparetotalCAST Clear coating and casting jewelry
✔ Coating, sealing, Good liquid
✔ Crystal clear, UV resistant
✔ Shore D70-75
✔ Casting thickness 1 mm <> 20 mm
✔ 10-15 @23°C minutes working time
✔ Mixing ratio (Weight) 100: 100€ 42,95 € 35,50 Excl. tax
CompareSilicone Addition Green 30 Set
✔ Flexible, Strong
✔ Green
✔ Shore (A) 30 (Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100€ 31,50 € 26,03 Excl. tax
CompareB 5 - B component for Silicone Condensation 5, 20 and 35 universal
✔ Low dosage (5%)
✔ Low shrinkage (< 0.3 %)
✔ Mixing ratio (Weight) 100:5
✔ Works on most condensation curing silicones€ 4,78 € 3,95 Excl. tax
CompareLightweight kneadable Epoxy
✔ Kneading compound, Strong, very lightweight
✔ Shore D70-75
✔ Max. thickness 40 mm
✔ 20 minutes working time
✔ Mixing ratio (Weight) 100: 100€ 19,95 € 16,49 Excl. tax
CompareSilicone Addition Pink 10
✔ Flexible, Strong
✔ Pink
✔ Shore (A) 10 (Soft)
✔ Low shrinkage (<0.1%)
✔ 40 minutes of working time
✔ Mixing ratio (Weight) 100: 100€ 36,25 € 29,96 Excl. tax
ComparePolyvinyl Alcohol Release agent (PVA)
✔ Provides a protective layer against poisoning from addition-hardening silicone
✔ Easy to process
✔ Soluble in water€ 4,95 € 4,09 Excl. tax
ComparePT Flex 97
✔ Elastic, Strong, High details
✔ Yellow/Amber colored
✔ Shore A97
✔ Castings 1mm <>20mm
✔ 4 minutes working time
✔ Mixing ratio (Weight)100:100€ 38,50 € 31,82 Excl. tax
CompareSilicone condensation HT 60 Set - Hard
✔ Very Hard, Heat resistant up to 380 ° C
✔ Red, Liquid, Non-Bleeding
✔ Shore (A) 60
✔ Low shrinkage (<0.8%)
✔ 40 minutes of working time
✔ Mixing ratio. (Weight) 100: 2€ 45,95 € 37,98 Excl. tax
CompareCondensation silicone DC 3481 Fast
✔ Flexible, Strong, Fast
✔ Beige, Good Fluid, Non-Bleeding
✔ Shore (A) 23
✔ Low shrinkage (0.2 ~ 0.4%)
✔ 30 minutes working time
✔ Mixing ratio (Weight) 100: 5€ 160,55 € 132,69 Excl. tax
CompareStensil ECO 20 Orange
✔ Kneadable silicone, Strong, Sand
✔ Shore (A) 20
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100€ 21,- € 17,36 Excl. tax
CompareSilicone Condensation 20 Starter kit
✔ Complete starter kit
✔ Contains the popular Condensation 20 silicones and more
✔ Ideal for soap molds, candle molds or concrete molds€ 31,50 € 26,03 Excl. tax
CompareStensil ECO 30 Sand
✔ Kneadable silicone, Strong, Sand
✔ Shore (A) 30
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100€ 21,- € 17,36 Excl. tax
CompareStensil ECO 95 Blue
✔ Kneadable silicone, Strong, Blue
✔ Shore (A) 95 (Hard)
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100€ 21,- € 17,36 Excl. tax
CompareCenusil M 825
CENUSIL® M 825 A/B is especially suitable for all molds of models with extensive undercuts.
€ 11.254,- € 9.300,83 Excl. tax
ComparePlastique Culinair® Fast
✔ Kneading compound, Strong, Blue
✔ FDA Approved
✔ Shore (A) 40 (Hard)
✔ Low shrinkage (<0.1%)
✔ 100 Seconds of working time
✔ Mixing ratio. (Weight) 100: 100€ 47,04 € 38,88 Excl. tax
Compare
Miniatures are a wonderful way to make fantasy come to live or to showcase historical events.
Usually, silicone molds are used to cast plastics, gips or even tin into. You can also make a copy of your miniature and change it partly to quickly create multiple variations.
Because the dimensional accuracy is important, we recommend the use of addition curing silicones without adding oils or other materials that will (over time) escape from the silicone mould.
Some silicones are able to withstand high temperatures for a short while (up to 380 o) This makes it possible to cast low melting point alloys like tin into them and create your own tin miniature.
However most often miniatures are made from polyurehtane. This is a handy plastic material that is easy to process. After it has cured this material is easy to process further(grinding, drilling, polishing, etc.)