Statues
Statues of concrete, cement or acrylic resin or plaster require a strong silicone with good tensile strength
B 5 - B component for Silicone Condensation 5, 20 and 35 universal
€ 4,78 € 3,95 Excl. tax
✔ Low dosage (5%)
Compare
✔ Low shrinkage (< 0.3 %)
✔ Mixing ratio (Weight) 100:5
✔ Works on most condensation curing siliconesWax Modeling wax Hard
€ 19,95 € 16,49 Excl. tax
✔ Hard modeling wax, not grainy
Compare
✔ Bronze colored, Block
✔ No shrinkage
✔ Pour point 66°C
✔ Melting point 70°C
✔ Ash content after combustion <0.03%Silicone Condensation 35 A component
€ 13,31 € 11,- Excl. tax
✔ Flexible, Strong, Universal
Compare
✔ White, relatively good Liquid, Bleeding
✔ Shore (A) 32-37 medium hard
✔ Stretchable > 400%
✔ Low shrinkage (< 0.3 %)Silicone Addition Green 30 Set
€ 31,50 € 26,03 Excl. tax
✔ Flexible, Strong
Compare
✔ Green
✔ Shore (A) 30 (Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100Silicone Condensation DC 3481 R
€ 33,50 € 27,69 Excl. tax
✔ Flexible, Strong, High PU and polyester resin resistance
Compare
✔ Beige, Good Fluid, Non-Bleeding
✔ Shore (A) 18 ~ 21
✔ Low shrinkage (0.2 ~ 0.4%)
✔90 ~ 120 minutes working time
✔ Mixing ratio (Weight) 100: 5Wax Microcrystalline Pastille LMP
€ 14,50 € 11,98 Excl. tax
✔ Basic wash, Mixed wash, Soft
Compare
✔ Natural, Flexible, Pastilles
✔ A lot of shrinkage
✔ Pour point 64°C
✔ Melting point 68°C
✔ Ash content after combustion <0.03%Bodycasting Primer Black
€ 4,95 € 4,09 Excl. tax
Primer for substrates such as acrylic resin or porcelain plaster. Quick-drying, resistant to ageing, pH-neutral, waterproof when dry.
CompareEpoxy Crystal Clear Pro
€ 40,- € 33,06 Excl. tax
✔ For medium-sized objects
Compare
✔ Clear, colorless, With the best UV stability available in Epoxy
✔ Temperature resistant up to 46°C
✔ Shore D 85 to D 21
✔ Castings 1 cm - 9 cm
✔ 19 hours @23 °C* demould ime
✔ Mix ratio. (Weight)1Condensation silicone DC 3481 Fast
€ 160,55 € 132,69 Excl. tax
✔ Flexible, Strong, Fast
Compare
✔ Beige, Good Fluid, Non-Bleeding
✔ Shore (A) 23
✔ Low shrinkage (0.2 ~ 0.4%)
✔ 30 minutes working time
✔ Mixing ratio (Weight) 100: 5Silicone Condensation 20 for Polyester
€ 19,18 € 15,85 Excl. tax
✔ Flexible, Strong, good resistance to polyester
Compare
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 120 minutes working time
✔ Mix ratio (Weight) 100:5Silicone Condensation 20 Starter kit
€ 31,50 € 26,03 Excl. tax
✔ Complete starter kit
Compare
✔ Contains the popular Condensation 20 silicones and more
✔ Ideal for soap molds, candle molds or concrete moldsWax Paraffin B600
€ 10,62 € 8,78 Excl. tax
✔ Basic wax, Mixed wax, Soft
Compare
✔ White, Flexible, Pastilles
✔ A lot of shrinkage
✔ Pour point 63 ° C
✔ Melting point 64 ° C
✔ Ash content after combustion <0.03%- Pay later with Klarna
- 30 Days return period!
- Advice from real Experts
Monster Clay Green
€ 40,95 € 33,84 Excl. tax
✔ Elastic, Non-Toxic, Sulfur-Free
Compare
✔ Green, Does not dry out
✔ Oil-based Clay
✔ Reusable, Pourable
✔ Melting temperature 57.2 ⁰CWax Modeling Wax Medium Hard
€ 19,95 € 16,49 Excl. tax
✔ Moderately Hard Modeling Wax, Not grainy
Compare
✔ Copper colored, Block
✔ No shrinkage
✔ Pour point 61 ° C
✔ Melting point 65 ° C
✔ Ash content after combustion <0.03%Wax casting wax artcast Red
€ 14,90 € 12,31 Excl. tax
✔ Slush casting, A lot of detail
Compare
✔ Pink, Pastilles
✔ Low shrinkage
✔ Pour point 57 ° C
✔ Melting point 63 ° C
✔ Ash content after combustion <0.03%Apoxie Super White
€ 13,70 € 11,32 Excl. tax
✔ Kneading compound, water resistant
Compare
✔ Very fine grain
✔ Very white
✔ 0% shrinkage / breakage
✔ 1 hour working time
✔ Mixing ratio (Weight) 100: 100T47 B component for condensation silicone
€ 6,05 € 5,- Excl. tax
✔ Very fast
Compare
✔ Low dosage
✔ Can be used neat or mixed
✔ Retain properties of other hardener at low dosage
✔ Low shrinkage (< 0.3 %)
✔ 5 minutes working time
✔ Mixing ratio (Weight) 100:2Epoxy support Glassfiber Cover
€ 46,05 € 38,06 Excl. tax
✔ Strong, fiberglass filled
Compare
✔ Malleable
✔ Blue
✔ Support cover Thickness +/- 5 mm
✔ 20-30 minutes working time
✔ Mixing ratio (Weight) 100: 5Wax Allround
€ 7,50 € 6,20 Excl. tax
Wax Allround is suited for casting or slush casting of pattern molds and runners
CompareT21 B component for condensation silicone
€ 6,05 € 5,- Excl. tax
✔ 5% dosage
Compare
✔ dry, stretchable result
✔ Can be used neat or mixed
✔ Low shrinkage (< 0.3%)
✔ Better resistance to PU and EpoxySilicone Addition Yellow 25 Set
€ 31,50 € 26,03 Excl. tax
✔ Flexible, Strong
Compare
✔ Yellow
✔ Shore (A) 25 (Moderately Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100Epoxy Support Cap EPOPAST 402/400
€ 338,- € 279,34 Excl. tax
✔ Low odor
Compare
✔ Low density
✔ Easy processing
✔ Temperature resistant 70°CSculptaClay Brown Firm
-7% Sale
€83,44 € 77,87 € 64,36 Excl. tax
✔A firm formulation designed for heavy carving and fine detailing
Compare
✔ Excellent for hand shaping or modeling
✔ Bonds easily to itself and other waxes
✔ Carves like soft clay
✔ Designed with casting in mind, with an extremely low ash conteT40 B component for condensatie silicone
€ 5,87 € 4,85 Excl. tax
✔ 2-3% dosage
Compare
✔ Medium fast
✔ Can be used pure or mixed
✔ Low shrinkage (< 0.3%)
When you are duplicating or making a statue, silicone is your material of choice. Silicones copy details up to 1 micro meter. Silicones are flexible which will greatly facilitate the removal of the final casting. Our silicones normally are 2 component liquid silicones that harden at room temperature (Room Temperature Vulcanising). However when you prefer to brush the silicone onto your model you can thicken the silicone using a thixo.
With silicones you can make flexible moulds of statues and figurines for wax, soap, concrete, cement, acrylic resin, plaster polyurethane, epoxide and many more casting materials. If you use a resin that is “aggressive” to silicone, like polyurethane, polyester or epoxide the number of castings you can make is limited by the kind of resin and the volume of the casting. All other neutral casting products can be cast into this mould almost limitlessly.
When building a silicone mould we normally advise to build a 5 mm thick silicone skin. For larger moulds however this will make the silicone mould less stable. To counter this one can use a support. A support is often made out of wood or plaster. Lightweight supports are made from acrylic resin with glass fibre fabric or an epoxide support material set. Often the case / moulding box in which the silicone is poured over the original model is used as a support.
Moulding boxes can be made from wood, plastic (like a case for butter) or even made with Lego stones or kneaded with plasticine. The better the box fits around the model the fewer silicone you use. Please take care to lacquer / finish moulding boxes made out of porous materials like unfinished wood or clay. This also goes for the model you want to copy.