Statues
Statues of concrete, cement or acrylic resin or plaster require a strong silicone with good tensile strength
A1 Acrylic Resin
€ 15,95 € 13,18 Excl. tax
✔ Odorless, Environmentally Friendly, Fire Resistant
Compare
✔ Cream white, Strong, UV Stable
✔ Shore D 80
✔ Shrink-free
✔ 20 minutes of working time
✔ Mixing ratio (Weight) 100: 50Silicone Condensation 20 universal
€ 14,48 € 11,97 Excl. tax
✔ Flexible, Strong, Universal
Compare
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 28
✔ Low shrinkage (<0.3%)
✔ 60 minutes working time
✔ Mix ratio (Weight) 100:2Apoxie Sculpt
€ 14,75 € 12,19 Excl. tax
✔ Kneading compound, water resistant
Compare
✔ Smooth consistency
✔ Many different colors
✔ 0% shrinkage / breakage
✔ 2-3 hours working time
✔ Mixing ratio (Weight) 100: 100PT Flex 85
€ 66,50 € 54,96 Excl. tax
✔ Elastic, Strong, High details
Compare
✔ Yellow / Amber colored
✔ Shore A85
✔ Castings 1mm <> 50mm
✔ 5 minutes working time
✔ Mixing ratio (Weight) 100: 100Plasticine
€ 8,95 € 7,40 Excl. tax
✔ Soft, Non-Toxic, Gray is Sulfur Free
Compare
✔ Many Colors, Does not dry out
✔ Synthetic Clay
✔ Fully meltable
✔ Melting temperature 35 ⁰CLightweight kneadable Epoxy
€ 14,50 € 11,98 Excl. tax
✔ Kneading compound, Strong, very lightweight
Compare
✔ Shore D70-75
✔ Max. thickness 40 mm
✔ 20 minutes working time
✔ Mixing ratio (Weight) 100: 100Gilding Wax - Pébeo 30 ml.
€ 14,25 € 11,78 Excl. tax
✔ Give your sculpture or casting a beautiful metallic color
Compare
✔ For example for a classic gold or copper look
✔ Immediately ready for use
✔ Works great on porcelain plaster or acrylic resinMonster Clay
€ 40,95 € 33,84 Excl. tax
✔ Elastic, Non-Toxic, Sulfur-Free
Compare
✔ Red / Brown, Does not dry out
✔ Oil-based Clay
✔ Reusable, Pourable
✔ Melting temperature 57.2 ⁰CPT Flex 60
€ 42,- € 34,71 Excl. tax
✔ Elastic, Strong, High details
Compare
✔ Yellow / Amber colored
✔ Shore A55
✔ Castings 1mm <> 50mm
✔ 5 minutes working time
✔ Mixing ratio (Weight) 100: 100Silicone Condensation 20 for PU and epoxy
€ 19,45 € 16,07 Excl. tax
✔ Flexible, Strong, good resistance to pu and epoxy
Compare
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 120 minutes working time
✔ Mix ratio (Weight) 100: 5Monster Clay Gray
€ 40,95 € 33,84 Excl. tax
✔ Elastic, Non-Toxic, Sulfur-Free
Compare
✔ Gray, Does not dry out
✔ Oil-based Clay
✔ Reusable, Pourable
✔ Melting temperature 57.2 ⁰CApoxie Clay
€ 17,75 € 14,67 Excl. tax
✔ Kneading compound, water resistant
Compare
✔ Clay-like texture / Grainy
✔ Colors: white or native
✔ 0% shrinkage / breakage
✔ 1-3 hours working time
✔ Mixing ratio (volume) = 100: 100- Advice from real Experts
- Ordered before 4 pm (Friday before 2 pm) is Shipped same Day
- 30 Days return period!
Gilding Wax
-40% Sale
€8,95 € 5,37 € 4,44 Excl. tax
✔ Give your sculpture or casting a beautiful metallic color
Compare
✔ For example for a classic bronze or copper look
✔ Immediately ready for use
✔ Works great on porcelain plaster or acrylic resintotalCAST Clear coating and casting jewelry
€ 42,95 € 35,50 Excl. tax
✔ Coating, sealing, Good liquid
Compare
✔ Crystal clear, UV resistant
✔ Shore D70-75
✔ Casting thickness 1 mm <> 20 mm
✔ 10-15 @23°C minutes working time
✔ Mixing ratio (Weight) 100: 100Silicone Addition Pink 10
€ 36,25 € 29,96 Excl. tax
✔ Flexible, Strong
Compare
✔ Pink
✔ Shore (A) 10 (Soft)
✔ Low shrinkage (<0.1%)
✔ 40 minutes of working time
✔ Mixing ratio (Weight) 100: 100Silicone Elastosil M 4601 A/B
€ 39,95 € 33,02 Excl. tax
✔ Flexible, Strong, Red-Brown
Compare
✔ Good resistance to Resins
✔ Shore (A) 28 (Medium Hard)
✔ Low shrinkage (<0.1%)
✔ 90 minutes working time
✔ Mixing ratio (Weight) 90:10
✔ Suitable for tin casting
✔ Food safeC-Glass Non Woven 30 g/m²
€ 2,95 € 2,44 Excl. tax
The C-Glass fabric can be applied in different processes (e. g. by using low pressure) in order to achieve visually and chemically improved surfaces. The binder disperses quickly in the resin, therefore it is possible to handle complex geometries and
ComparePT Flex 97
€ 38,50 € 31,82 Excl. tax
✔ Elastic, Strong, High details
Compare
✔ Yellow/Amber colored
✔ Shore A97
✔ Castings 1mm <>20mm
✔ 4 minutes working time
✔ Mixing ratio (Weight)100:100Wax Modeling wax Hard
€ 19,95 € 16,49 Excl. tax
✔ Hard modeling wax, not grainy
Compare
✔ Bronze colored, Block
✔ No shrinkage
✔ Pour point 66°C
✔ Melting point 70°C
✔ Ash content after combustion <0.03%Silicone Addition Green 30 Set
€ 31,50 € 26,03 Excl. tax
✔ Flexible, Strong
Compare
✔ Green
✔ Shore (A) 30 (Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100PT Flex 50
€ 39,95 € 33,02 Excl. tax
✔ Elastic, Strong, High details
Compare
✔ Yellow/Amber colored
✔ Shore A50
✔ Castings 1mm <>50mm
✔ 4 minutes working time
✔ Mixing ratio (Weight)100:100Casting wax for Jewellery
€ 429,85 € 355,25 Excl. tax
✔ Small jewelry, lots of detail
Compare
✔ Blue, Pastilles, slightly flexible
✔ Low shrinkage
✔ Pour point 66 ° C
✔ Melting point 75 ° C
✔ Ash content after combustion <0.03%Microcrystalline wax LMP slab
€ 4.116,42 € 3.402,- Excl. tax
✔ Basic wax, Mixed wax, Shell wax
Compare
✔ Natural, Flexible, Plate, Soft
✔ A lot of shrinkage
✔ Pour point 64 ° C
✔ Melting point 68 ° C
✔ Ash content after combustion <0.03%Silicone Condensation DC 3481 R
€ 33,50 € 27,69 Excl. tax
✔ Flexible, Strong, High PU and polyester resin resistance
Compare
✔ Beige, Good Fluid, Non-Bleeding
✔ Shore (A) 18 ~ 21
✔ Low shrinkage (0.2 ~ 0.4%)
✔90 ~ 120 minutes working time
✔ Mixing ratio (Weight) 100: 5
When you are duplicating or making a statue, silicone is your material of choice. Silicones copy details up to 1 micro meter. Silicones are flexible which will greatly facilitate the removal of the final casting. Our silicones normally are 2 component liquid silicones that harden at room temperature (Room Temperature Vulcanising). However when you prefer to brush the silicone onto your model you can thicken the silicone using a thixo.
With silicones you can make flexible moulds of statues and figurines for wax, soap, concrete, cement, acrylic resin, plaster polyurethane, epoxide and many more casting materials. If you use a resin that is “aggressive” to silicone, like polyurethane, polyester or epoxide the number of castings you can make is limited by the kind of resin and the volume of the casting. All other neutral casting products can be cast into this mould almost limitlessly.
When building a silicone mould we normally advise to build a 5 mm thick silicone skin. For larger moulds however this will make the silicone mould less stable. To counter this one can use a support. A support is often made out of wood or plaster. Lightweight supports are made from acrylic resin with glass fibre fabric or an epoxide support material set. Often the case / moulding box in which the silicone is poured over the original model is used as a support.
Moulding boxes can be made from wood, plastic (like a case for butter) or even made with Lego stones or kneaded with plasticine. The better the box fits around the model the fewer silicone you use. Please take care to lacquer / finish moulding boxes made out of porous materials like unfinished wood or clay. This also goes for the model you want to copy.