Collection

Silicone glue Wacker Elastosil E43 BLACK- Food grade

-13% Sale

€30,50 € 26,50 € 21,90 Excl. tax

✔ One component acid-based curing system.
✔ Self-leveling.
✔ Excellent adhesion on various surfaces
✔ Colorless transparent or Black
✔ Good mechanical properties
✔ Heat resistant
✔ Resistant to weather influences and aging
✔ Pe

Polyurethane foam flexible 50 liquid

€ 35,14 € 29,04 Excl. tax

✔ Flexible foam
✔ Brownish
✔ Up to 20X volume increase
✔ Final density 50 kg/m³
✔ Mixing ratio by weight: 100:50

Silicone Addition Colorless 25 (average hardness)

€ 28,95 € 23,93 Excl. tax

✔ Flexible, Strong
✔ Translucent
✔ Shore (A) 25 (average hardness)
✔ Low shrinkage (< 0.1 %)
✔30 minutes working time
✔ Mixing ratio by weight: 100:100

BRB SF 242 aminofunctional polydimethylsiloxane

€ 27,62 € 22,83 Excl. tax

✔ 100% active amino-functional silicone oil
✔ Lower amine content but higher molecular weight than standard amino oils
✔ Easy to emulsion
✔ Less reactive than other amino-functional silicones/siloxanes
✔ Gloss enhancing

WACKER® SILICONE PASTE P

€ 128,- € 105,79 Excl. tax

✔ Lubricant
✔ non-curing, with retention of pasty consistency
✔ water resistant, water repellent
✔ electrically insulating
✔ good surface slip
✔ high dielectric strength
✔ Good adhesion to metals, glass and ceramics
✔ Food-cont

Silicone foam Closed Cell 3 - Spreadable

€ 272,92 € 225,55 Excl. tax

✔ Foam factor 3
✔ Spreadable
✔ Hardness Shore C 2-50
✔ Flame retardant UL94-HB
✔ Closed cell structure
✔ Mixing ratio (Weight) 100:100
✔ Processing time 3 minutes
✔ Curing time 50 min @ 60°C
✔ Density 0.352 g/cm³

Silicone foam Open Cell 7 - Spreadable

€ 272,92 € 225,55 Excl. tax

✔ Foam factor 7
✔ Spreadable
✔ Hardness Shore C 5-10
✔ Flame retardant UL94-V0
✔ Open cell structure
✔ Mixing ratio (Weight) 100:100
✔ Working time 2 minutes
✔ Curing time 70 min @ 60°C
✔ Density 0.162 g/cm³

Silicone foam Closed Cell 3

€ 272,92 € 225,55 Excl. tax

✔ Foam factor 3
✔ Hardness Shore C 2-50
✔ Closed cell structure
✔ Mixing ratio (Weight) 100:100
✔ Processing time 3 minutes
✔ Curing time 50 minutes
✔ Density 0.352 g/cm³

Silicone foam Closed Cell 5

€ 34,- € 28,10 Excl. tax

✔ Foam factor 5
✔ Hardness Shore C 7
✔ Closed cell structure
✔ Mixing ratio (Weight) 100:100
✔ Processing time 2 minutes
✔ Curing time 1 hours
✔ Density 0,175 g/cm³

Silicone foam Open Cell 6

€ 34,08 € 28,17 Excl. tax

✔ Foam factor 6
✔ Hardness Shore C 4
✔ Open cell structure
✔ Mixing ratio (Weight) 100:100
✔ Working time 2 minutes
✔ Curing time 2 hours
✔ Density 0.193 g/cm³

PEG-12 Dimethicone

€ 30,79 € 25,45 Excl. tax

A silicone copolymer soluble in water, alcohol and hydroalcoholic systems
✔ Reduces surface tension
✔ Foaming agent
✔ Wetting agent ✔
Emulsifying agent for Silicone-Water

ELASTOSIL® C 1200 A/B

€ 453,66 € 374,93 Excl. tax

✔ Suitable for the production of reusable silicone vacuum bags.
✔ Fast curing at room temperature
✔ No chemical shrinkage
✔ Resistance to epoxy resins
✔ Resistance to polyester
✔ Two components 1:1
✔ blue / Transparent

Dimethicone PDMS 1000 cSt, Silikonöl für Pharma

€ 25,93 € 21,43 Excl. tax

✔ Thin liquid (low viscosity) 1000 cSt
✔ Ignition temperature: 410°C
✔ Freezing point: -50°C
✔ Extra purified for cosmetic purposes
✔ Making silicone softer, more stretchable, flexible
✔ Colorless and odorless
✔ FDA 21 CFR

Impact-resistant polyurethane D75 / Neukadur Multicast 11

€ 15,50 € 12,81 Excl. tax

✔ Hard, Small to slightly larger castings
✔ Beige, Strong, High details, very impact resistant
✔ Shore D 75 Unfilled
✔ Castings 4mm <>30mm
✔ 5-7 minutes working time
✔ Mixing ratio (Weight) 100:100

Epoxy Support Cap EPOPAST 402/400

€ 338,- € 279,34 Excl. tax

✔ Low odor
✔ Low density
✔ Easy processing
✔ Temperature resistant 70°C

Siliconen Primer Wacker G790 - toluene free

€ 18,25 € 15,08 Excl. tax

✔ Increases the adhesion between condensation and addition curing silicone and various surfaces
✔ Used for Arresters, Cable Accessories, Insulators
✔Organic solvent, free of toluene and aromatic solvents

PDMS 350 cSt EP, Silikonöl für Pharma

€ 36,37 € 30,06 Excl. tax

✔ Thin liquid (low viscosity) 350 cSt
✔ Ignition temperature: >300°C
✔ Freezing point: -50°C
✔ Suitable for Pharma
✔ Colorless and odorless
✔ FDA 21 CFR Par177.2600 conform

Elastosil RT 602

€ 74,- € 61,16 Excl. tax

✔ All-round potting agent
✔ Addition-hardening
✔ Liquid
✔ Good heat stability
✔ Very transparent
✔ Two-component 9:1
✔ Shore (A) 45

Siliconen Primer Wacker G795

€ 22,16 € 18,31 Excl. tax

✔ Increases the adhesion between condensation and addition curing silicone and various surfaces
✔ Functions on metals, wood, various plastics such as PETG
✔ Soluble in white spirit or alcohol
✔ Works with silicones with a high oil content

Elastosil RT 601

€ 125,78 € 103,95 Excl. tax

✔ Potting automotive and optical parts
✔ Addition hardening
✔ Liquid
✔ Crystal clear
✔ Two-component 9:1
✔ Shore (A) 45

Siliconen Primer Wacker G791

€ 22,41 € 18,52 Excl. tax

✔ low solvent content
✔ straightforward processing
✔ 2 component mixing ratio 1:1
✔ excellent adhesion
✔ no drying necessary

Silicone Primer Wacker AV (SLM 74300)

€ 49,06 € 40,55 Excl. tax

✔ low solvent content
✔ straightforward processing
✔ 2 component mixing ratio 2:1
✔ excellent adhesion
✔ no drying necessary

Silicone adhesive Wacker ELASTOSIL® N2010

-16% Sale

€37,89 € 32,- € 26,45 Excl. tax

✔ Recommended operating temperature from -45 °C to +180 °C
✔ Neutral curing (Alkoxy), no acid
✔ Sprayable
✔ Good adhesion to many substrates without primer
✔ One component
✔ Solvent free
✔ Self-Leveling

Eyewash bottle Braun 500 ml

€ 10,90 € 9,01 Excl. tax

A saline solution of 0.9% sodium chloride fills this Braun eyewash bottle 500 ml. This solution corresponds to the natural salt content of the eyes.